Operated By:
Advancement International Ltd.
595 Circlewood, Aurora, OH 44202(USA)
Email: sales@LugsDirect.com
Phone: 330-562-8983 | FAX: 330-562-9990

IHIConnectors

Brumall Manufacturing

Corp.

Greaves

Electrical Connectors

Hillsdale Terminal

Accepted forms of payment:

Made in the USA
from Domestic and Imported Parts

THT MODE

See all SMT PCB Wire Lugs

Ring Lug Mount Block up to 30 Amps

Part No.

Description & Information

Purchase Options

B10-PCB-RLM-KIT

10 AWG Lug

Ring Lug

Wire Range

Max. Current (Copper Wire)

Wire / Screw Access

Screw / Drive Head

Mounting Style-

1 to 434pcs
$0.84/ea
(or)
435pcs & up
$0.63/ea
(or)

3000pcs
"full box"
$0.47/ea
or
6000pcs
"full box"
$0.42/ea

AWG 10-16

(5.261-1.31mm²)

30A

Ring Lug Mount

Phillips Screw

SMT Solderable Surface Mount

B10-PCB-RLM, 10AWG - 16AWG High AMP PCB wire lug

rlm with 2 wrenches
When tightening bolt,
two wrenches should be used to avoid damaging smt bond

dimensions diagram

Dimensions

A: 0.34" (8.6mm)

B: 0.49" (12.4mm)

C: 0.26" (6.6mm)

D: 0.39" (9.9mm)

See Mechanical Drawing for detailed dimensions

B10-PCB-RLM-KIT: Ring lug mount block with integrated aluminum foot, tin plated, solderable. Suggested ring lug wire sizes 10-16 AWG, up to 30 Amps. Kitted with a zinc plated steel phillips screw and washer. Ring lug not included. Part side hole not intended for wire insertion when the part is used as a ring lug mount. SMT/SMD solderable tin plated. International Hydraulics Inc.

Temperature Range and Rating Guide

One piece SMT / SMD Solderable Body Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). View Soldering Temperature Profiles here. Wire choice affected by customer supplied ring lug and ring lug codes and ratings. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards.

Soldering Recommendations, Precautions when using SMT, and SMT FAQ

B12-NM-SMT orientations

Figure 2: Less Sturdy: Horizontal screw and horizontal wire. Best for factory wiring only.

Figure 3: Least Sturdy: Horizontal screw and vertical wire. Best for factory wiring only.

In Figure 2 and 3 orientation, when using a headed screw or ring lug and bolt it's recommended that the head of the screw hangs off the edge of the board. Screws with little or no clearance between the head of the screw and the board can result in mechanical and electrical fouling.

Looking for a sturdier mounting method? See the THT through hole technology function of this part: THT B10-PCB-SMT-RLM

For More Information Click the Icons Below
				NO UL, UR	RoHS 10/10

This part currently has no UL / Canada certification on the lug itself but is approvable under requirements of UL486A-B or UL486E as part of a end use assembly test involving heat rise and wire pull out tests. CLICK HERE FOR MORE INFO.