IHIConnectors

Accepted forms of payment:

High AMP 90C PCB Wire Terminals

IHI 90C High current PCB terminal lugs - maximum currents of 130 AMPs maximum wire capacity 2 AWG

Dimensions

A: 0.47" (11.9mm)

B: 0.55" (14.0mm)

C: 0.46" (11.7mm)

See Mechanical Drawing for detailed dimensions

For mounting and anti rotation methods see the IHI B4B Installation Guide.

B4B has been updated with UL Listing in addition to Canada certification.

"B4B-PCB-B" 4 AW, 95 AMP, 4-14 AWG wire range, single wire, all copper body, solid brass screw, copper wire only, CU9, 90C temperature rating, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, and Canada Certified for USA and Canada, oversized wire opening. Flat end screw with cut trepan face for gripping large and small stranded wires without damage. 2 legs at .3 x .063 with a .15" penetration. International Hydraulics Inc® brand.

Temperature Range and Rating Guide

Body and Staple THT Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid copper bus staple for tens of micro ohms range of copper to copper high conductivity, low resistance current path.  Meets IEC volt drop test standards. Variety of THT leg length to accommodate PCB of various thicknesses including multilayer. 

Dimensions

A: 0.41" (10.4mm)

B: 0.56" (14.2mm)

C: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

*Wire range only valid with use of a bus bar or staple.

"B2A9" 2 AWG OEM, 2-14 AWG wire range, tin plated aluminum with tin plated aluminum slotted set screw, aluminum or copper wire, CU9AL, 90C temperature rating, single wire terminal, UL Recognized at 600v - acceptable for use through 2000v. The most compact #2 AWG wire connector available.

Tin plated aluminum screw.

Aluminum Screw Driver Tip Guide

130 Amps copper alloy bus cross section .25 x .047
or
.25 x .05 or 50 Amps bus 5/32" or

.25 x .032

Dimensions

A: 0.41" (10.4mm)

B: 0.56" (14.2mm)

C: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

*Wire range only valid with use of a bus bar or staple.

"B2A9-HEX" 2 AWG OEM, 2-14 AWG wire range, tin plated aluminum with hex socket screw, aluminum or copper wire, CU9AL, 90C temperature rating, single wire terminal, UL Recognized at 600v - acceptable for use through 2000v. The most compact #2 AWG wire connector available.

Temperature Range and Rating Guide

Tin plated aluminum screw.

Aluminum Screw Driver Tip Guide

Dimensions

A: 0.41" (10.4mm)

B: 0.56" (14.2mm)

C: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

B2A9-PCB: 2 AWG PCB wire lug, (2)3-14 AWG, 130A/100A AMP, slotted set screw. 2 legs (.24X.05”) with a 0.16" (4mm) PCB penetration. Side wire, and top screw entrance. UL Recognized at 600v - acceptable for use through 2000v. IHI Connectors® brand.

Temperature Range and Rating Guide

Body and Staple THT Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid copper bus staple for tens of micro ohms range of copper to copper high conductivity, low resistance current path.  Meets IEC volt drop test standards. Variety of THT leg length to accommodate PCB of various thicknesses including multilayer. 

Tin plated aluminum screw, and tin plated copper staple, solderable

Aluminum Screw Driver Tip Guide

Dimensions

A: 0.41" (10.4mm)

B: 0.56" (14.2mm)

C: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

B2A9-PCB-HEX: 2 AWG PCB wire lug, 2(3)-14 AWG, 130A/100A AMP, HEX socket screw. 2 legs (.24X.05”) with a 0.16" (4mm) PCB penetration. Side wire, and top screw entrance. UL Recognized at 600v - acceptable for use through 2000v. IHI Connectors® brand.

Temperature Range and Rating Guide

90C (AL9CU) version available.

Body and Staple THT Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid copper bus staple for tens of micro ohms range of copper to copper high conductivity, low resistance current path.  Meets IEC volt drop test standards. Variety of THT leg length to accommodate PCB of various thicknesses including multilayer. 

Tin plated aluminum screw, and tin plated copper staple, solderable

Aluminum Screw Driver Tip Guide

Dimensions

A: 0.41" (10.4mm)

B: 0.56" (14.2mm)

C: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

B2A9-PCB-45: 2 AWG PCB wire lug, (2)3-14 AWG, 130A/100A AMP, Slotted set screw. 2 legs (.24X.05”) with a .09" (2.2mm) PCB penetration. Top wire, and screw entrance at 45 degrees. UL Recognized at 600v - acceptable for use through 2000v. IHI Connectors® brand.

Temperature Range and Rating Guide

Body and Staple THT Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid copper bus staple for tens of micro ohms range of copper to copper high conductivity, low resistance current path.  Meets IEC volt drop test standards. Variety of THT leg length to accommodate PCB of various thicknesses including multilayer. 

Tin plated aluminum screw, and tin plated copper staple, solderable

Aluminum Screw Driver Tip Guide

Dimensions

A: 0.41" (10.4mm)

B: 0.56" (14.2mm)

C: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

B2A9-PCB-45-HEX: 2 AWG PCB wire lug, 2(3)-14 AWG, 130A/100A AMP, HEX socket screw. 2 legs (.24X.05”) with a .09" (2.2mm) PCB penetration. Top wire, and screw entrance at 45 degrees. UL Recognized at 600v - acceptable for use through 2000v. IHI Connectors® brand.

Temperature Range and Rating Guide

Body and Staple THT Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid copper bus staple for tens of micro ohms range of copper to copper high conductivity, low resistance current path.  Meets IEC volt drop test standards. Variety of THT leg length to accommodate PCB of various thicknesses including multilayer. 

Tin plated aluminum screw, and tin plated copper staple, solderable

Aluminum Screw Driver Tip Guide

Dimensions

A: 0.41" (10.4mm)

B: 0.56" (14.2mm)

C: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

B2A9-PCB-45-150: 2 AWG PCB wire lug, 2(3)-14 AWG, 130A/100A AMP, tin plated aluminum screw. 2 legs (.24X.05”) with a 0.12" (3.0mm) PCB penetration. Top wire, and screw entrance at 45 degrees. UL Recognized at 600v - acceptable for use through 2000v. IHI Connectors® brand.

Temperature Range and Rating Guide

Body and Staple THT Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid copper bus staple for tens of micro ohms range of copper to copper high conductivity, low resistance current path.  Meets IEC volt drop test standards. Variety of THT leg length to accommodate PCB of various thicknesses including multilayer. 

Tin plated aluminum screw, and tin plated copper staple, solderable

Aluminum Screw Driver Tip Guide

Dimensions

A: 0.41" (10.4mm)

B: 0.56" (14.2mm)

C: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

B2A9-PCB-150-HEX: 2 AWG PCB wire lug, (2)3-14 AWG, 130A/100A AMP, tin plated aluminum screw. 2 legs (.24X.05”) with a 0.12" (3.0mm) PCB penetration. Top wire, and screw entrance at 45 degrees. UL Recognized at 600v - acceptable for use through 2000v. IHI Connectors® brand.

Temperature Range and Rating Guide

Body and Staple THT Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid copper bus staple for tens of micro ohms range of copper to copper high conductivity, low resistance current path.  Meets IEC volt drop test standards. Variety of THT leg length to accommodate PCB of various thicknesses including multilayer. 

Tin plated aluminum screw, and tin plated copper staple, solderable

Aluminum Screw Driver Tip Guide

Dimensions

A: 0.41" (10.4mm)

B: 0.56" (14.2mm)

C: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

B2A9-PCB-45-175: 2 AWG PCB wire lug, (2)3-14 AWG, 130A/100A AMP, slotted set screw. 2 legs (.24X.05”) with a 0.175" (4.4mm) PCB penetration. Top wire, and screw entrance at 45 degrees. UL Recognized at 600v - acceptable for use through 2000v. IHI Connectors® brand.

Temperature Range and Rating Guide

Body and Staple THT Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid copper bus staple for tens of micro ohms range of copper to copper high conductivity, low resistance current path.  Meets IEC volt drop test standards. Variety of THT leg length to accommodate PCB of various thicknesses including multilayer. 

Tin plated aluminum screw, and tin plated copper staple, solderable

Aluminum Screw Driver Tip Guide

Dimensions

A: 0.41" (10.4mm)

B: 0.56" (14.2mm)

C: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

B2A9-PCB-45-175-HEX: 2 AWG PCB wire lug, (2)3-14 AWG, 130A/100A AMP, Hex socket screw. 2 legs (.24X.05”) with a 0.175" (4.4mm) PCB penetration. Top wire, and screw entrance at 45 degrees. UL Recognized at 600v - acceptable for use through 2000v. IHI Connectors® brand.

Temperature Range and Rating Guide

Body and Staple THT Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid copper bus staple for tens of micro ohms range of copper to copper high conductivity, low resistance current path.  Meets IEC volt drop test standards. Variety of THT leg length to accommodate PCB of various thicknesses including multilayer. 

Tin plated aluminum screw, and tin plated copper staple, solderable

Aluminum Screw Driver Tip Guide

Dimensions

A: 0.41" (10.4mm)

B: 0.56" (14.2mm)

C: 0.85" (21.6mm)

See Mechanical Drawing for detailed dimensions

B2A9-2PCB: 2 AWG PCB wire lug, (2)3-14 AWG, 130A/100A AMP (per lug shunted pair), (x2) Slotted set screws. 2 legs (.24X.05”), and 1 leg (.67x.05") with a 0.16" (4mm) PCB penetration. Side wire, and top screw entrance. UL Recognized at 600v - acceptable for use through 2000v. IHI Connectors® brand.

Temperature Range and Rating Guide

Body and Staple THT Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid copper bus staple for tens of micro ohms range of copper to copper high conductivity, low resistance current path.  Meets IEC volt drop test standards. 

Tin plated aluminum screw, and tin plated copper staple, solderable

Aluminum Screw Driver Tip Guide

Dimensions

A: 0.41" (10.4mm)

B: 0.56" (14.2mm)

C: 0.85" (21.6mm)

See Mechanical Drawing for detailed dimensions

B2A9-2PCB-HEX: 2 AWG PCB wire lug, (2)3-14 AWG, 130A/100A AMP (per lug shunted pair), (x2) HEX socket screws. 2 legs (.24X.05”), and 1 leg (.67x.05") with a 0.16" (4mm) PCB penetration. Side wire, and top screw entrance. UL Recognized at 600v - acceptable for use through 2000v. IHI Connectors® brand.

Temperature Range and Rating Guide

Body and Staple THT Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid copper bus staple for tens of micro ohms range of copper to copper high conductivity, low resistance current path.  Meets IEC volt drop test standards. 

Tin plated aluminum screw, and tin plated copper staple, solderable

Aluminum Screw Driver Tip Guide

Dimensions

A: 0.41" (10.4mm)

B: 0.56" (14.2mm)

C: 0.42" (10.7mm)

D: 0.91" (23.1mm)

See Mechanical Drawing for detailed dimensions

B2A9-PCB-SMT: 2 AWG PCB wire lug, (2)3-14 AWG, 130A/100A AMP, slotted set screw. Side wire, and top screw entrance. UL Recognized at 600v - acceptable for use through 2000v. IHI Connectors® brand.

Temperature Range and Rating Guide

SMT / SMD Solderable Body Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.

Precautions when using SMT and SMT FAQ

Dimensions

A: 0.41" (10.4mm)

B: 0.56" (14.2mm)

C: 0.42" (10.7mm)

D: 0.91" (23.1mm)

See Mechanical Drawing for detailed dimensions

B2A9-PCB-SMT-HEX: 2 AWG PCB wire lug, (2)3-14 AWG, 130A/100A AMP, hex socket set screw. Side wire, and top screw entrance. UL Recognized at 600v - acceptable for use through 2000v. IHI Connectors® brand.

Temperature Range and Rating Guide

SMT / SMD Solderable Body Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards. Variety of wire binding screw options.

Precautions when using SMT and SMT FAQ

Lugs sold separately.

B2A9-PCB-XX

B2C-PCB-XX