IHIConnectors

Accepted forms of payment:

Six Wire Application

Dual Interlocking Lugs/

Seven Wire Application

S2-NB-2 and 3S4-3-21-28-HEX

Dimensions

A: 2.44" (62.0mm)

B: 1.63" (41.4mm)

C: 0.41" (10.3mm)

L: 0.50" (12.7mm)

See Mechanical Drawing for detailed dimensions

Per Wire in Power Distribution or Collection Mode:

85 Amp 75C Cu wire
65 Amp 75C Al Wire

Approved for three and four wire applications. (Two #10, #12, or #14 wires acceptable. No mixing.)

Dimensions

A: 1.21" 30.7mm)

B: 0.56" (14.2mm)

C: 0.46" (11.7mm)

See Mechanical Drawing for detailed dimensions

"P2" 2 AWG splicer reducer wire lug, 2-14 AWG wire class B/C, singles, and multiples of wires: 2x #10, 2x #12 or 2x #14 wires, aluminum or copper wire, and FLEX, 4-12 AWG, 4-16 with ferrule**, wire class G-K including mm2 class 5,splicer or reducer CU9AL, 90C temperature rating, single #10 bolt clearance mounting hole or wire insertion "sight" hole, or wire stop hole, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application. IHI Connectors® brand. Made in the USA from domestic and imported parts.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

**TORK KRIMP® Method for clamping wires using uncrimped ferrules is protected under Patent No. 10630005. Full instructions for self crimping ferrules here.

Approved for three and four wire applications. (Two #10, #12, or #14 wires acceptable. No mixing.)

Dimensions

A: 1.21" 30.7mm)

B: 0.56" (14.2mm)

C: 0.46" (11.7mm)

See Mechanical Drawing for detailed dimensions

"P2-HEX" 2 AWG splicer reducer wire lug, 2-14 AWG wire class B/C, singles, and multiples of wires: 2x #10, 2x #12 or 2x #14 wires, aluminum or copper wire, and FLEX, 4-12 AWG, 4-16 with ferrule**, wire class G-K including mm2 class 5, splicer or reducer CU9AL, 90C temperature rating, single #10 bolt clearance mounting hole or wire insertion "sight" hole, or wire stop hole, 1/8" Hex socket screw. Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application. IHI Connectors® brand. Made in the USA from domestic and imported parts.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

**TORK KRIMP® Method for clamping wires using uncrimped ferrules is protected under Patent No. 10630005. Full instructions for self crimping ferrules here.

Four wire application

Assembly PDF

Dual Interlocking Lugs/

Three Wire Application

2S1/0 and S1/0

Hardware not included.

Lugs sold individually.

For more interlocking lugs

click here.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.7mm)

C: 1.13" (28.6mm)

See Mechanical Drawing

for detailed dimensions

"2S1/0" 1/0 AWG double wire lug, 1/0-14 AWG wire class B/C, and multiple (dual) wires and FLEX wire, 1-8 AWG, wire class G-K including mm2 class 5, double barrel, aluminum or copper wire, CU9AL, 90C temperature rating, single 1/4" bolt mounting hole, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. Made in the USA from domestic and imported parts. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. Current and temperature rating subject to the lowest temperature rated conducting part in the assembly.

UL & Canada Approved for Multiple Wires 2X #14 to 2X #4 and (1X) FLEX wire Class G-K sizes #1-#8 AWG
Use of Ferrules (UL Listed) on wires 1-8 AWG

	DIY Mounting Holes™: Cat. No. 2S1/0 Style No. ALL
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S1/0 Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

Approved for up to 4 wires

Assembly PDF

Dual/Interlocking Lugs

7-9 Wire Application

2S1/0-HEX and 3S6-2S4-HEX

Hardware not included.

Lugs sold individually.

For more interlocking lugs

click here.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.7mm)

C: 1.13" (28.6mm)

See Mechanical Drawing for detailed dimensions

"2S1/0-HEX" 1/0 AWG double wire lug, 1/0-14 AWG wire class B/C, and multiple (dual) wires and FLEX wire, 1-8 AWG, wire class G-K including mm2 class 5, double barrel, aluminum or copper wire, CU9AL, 90C temperature rating, single 1/4" bolt mounting hole, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. 3/16" Hex Socket Screw. Made in the USA from domestic and imported parts. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. Current and temperature rating subject to the lowest temperature rated conducting part in the assembly.

UL & Canada Approved for Multiple Wires 2X #14 to 2X #4 and (1X) FLEX wire Class G-K sizes #1-#8 AWG
Use of Ferrules (UL Listed) on wires 1-8 AWG

	DIY Mounting Holes™: Cat. No. 2S1/0 Style No. ALL
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S1/0-HEX Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

Approved for up to 4 wires

Assembly PDF

Dual/Interlocking Lugs

7-9 Wire Application

2S1/0-HEX and 3S6-2S4-HEX

Hardware not included.

Lugs sold individually.

For more interlocking lugs

click here.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.7mm)

C: 1.13" (28.6mm)

See Mechanical Drawing for detailed dimensions

Note!!!   This part has a 5mm hex socket for use in metric countries.

"2S1/0-HEX-M" 1/0 AWG double wire lug, 1/0-14 AWG wire class B/C, and multiple (dual) wires and FLEX wire, 1-8 AWG, wire class G-K including mm2 class 5, double barrel, aluminum or copper wire, CU9AL, 90C temperature rating, single 1/4" bolt mounting hole, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. 5mm Hex Socket Screw. Made in the USA from domestic and imported parts. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. Current and temperature rating subject to the lowest temperature rated conducting part in the assembly.

UL & Canada Approved for Multiple Wires 2X #14 to 2X #4 and (1X) FLEX wire Class G-K sizes #1-#8 AWG
Use of Ferrules (UL Listed) on wires 1-8 AWG, Also class 2 & 5 mm2 sizes single and dual per rating label.

	DIY Mounting Holes™: Cat. No. 2S1/0 Style No. ALL
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S1/0-HEX-M Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Approved for two wire use

Assembly PDF

Dual Interlocking Lugs/

Three Wire Application

Assembly PDF

Dual/Interlocking Lugs

6-7 Wire Application

S1/0 and 3S6-2S4-HEX

Hardware not included.

Lugs sold individually.

For more interlocking lugs

click here.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.6mm)

C: 0.63" (15.9mm)

See Mechanical Drawing

for detailed dimensions

"S1/0" 1/0 AWG Single wire lug, 1/0-14 AWG wire class B/C, Multipe (dual) wire class B/C and FLEX wire, 1-8 AWG, wire class G-K including mm2 class 5, single barrel, aluminum or copper wire, CU9AL, 90C temperature rating, one mounting hole, slotted screw, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. 1/4" bolt mounting hole. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. Current and temperature rating subject to the lowest temperature rated conducting part in the assembly. IHI Connectors® brand.

UL & Canada Approved for Multiple Wires 2X #14 to 2X #4 and (1X) FLEX wire Class G-K sizes #1-#8 AWG
Use of Ferrules (UL Listed) on wires 1-8 AWG

	DIY Mounting Holes™: Cat. No. S1/0 Style No. 1,5
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S1/0 Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

Approved for two wire use

Assembly PDF

Dual Interlocking Lugs/

Three Wire Application

2S1/0 and S1/0

Assembly PDF

Dual/Interlocking Lugs

6-7 Wire Application

S1/0-HEX and 3S6-2S4-HEX

Hardware not included.

Lugs sold individually.

For more interlocking lugs

click here.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.6mm)

C: 0.63" (15.9mm)

See Mechanical Drawing for detailed dimensions

"S1/0" 1/0 AWG Single wire lug, 1/0-14 AWG wire class B/C, Multipe (dual) wire class B/C and FLEX wire, 1-8 AWG, wire class G-K including mm2 class 5, single barrel, aluminum or copper wire, CU9AL, 90C temperature rating, one mounting hole, slotted screw, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. 1/4" bolt mounting hole. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. Current and temperature rating subject to the lowest temperature rated conducting part in the assembly. IHI Connectors® brand.

UL & Canada Approved for Multiple Wires 2X #14 to 2X #4 and (1X) FLEX wire Class G-K sizes #1-#8 AWG
Use of Ferrules (UL Listed) on wires 1-8 AWG

	DIY Mounting Holes™: Cat. No. S1/0 Style No. 1,5
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S1/0-HEX Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

Approved for two wire use

Assembly PDF

Dual Interlocking Lugs/

Three Wire Application

2S1/0 and S1/0

Assembly PDF

Dual/Interlocking Lugs

6-7 Wire Application

S1/0-HEX and 3S6-2S4-HEX

For more interlocking lugs

click here.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.6mm)

C: 0.63" (15.9mm)

See Mechanical Drawing for detailed dimensions

Note!!!   This part has a 5mm hex socket for use in metric countries.

"S1/0" 1/0 AWG Single wire lug, 1/0-14 AWG wire class B/C, Multipe (dual) wire class B/C and FLEX wire, 1-8 AWG, wire class G-K including mm2 class 5, single barrel, aluminum or copper wire, CU9AL, 90C temperature rating, one mounting hole, slotted screw, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. 1/4" bolt mounting hole. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. Current and temperature rating subject to the lowest temperature rated conducting part in the assembly. IHI Connectors® brand.

UL & Canada Approved for Multiple Wires 2X #14 to 2X #4 and (1X) FLEX wire Class G-K sizes #1-#8 AWG
Use of Ferrules (UL Listed) on wires 1-8 AWG

	DIY Mounting Holes™: Cat. No. S1/0 Style No. 1,5
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S1/0-HEX-M Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

Assembly PDF

Dual/Interlocking Lugs

Three Wire Application

2S2/0 and S2/0

Hardware not included.

Lugs sold individually.

For more interlocking lugs

click here.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.7mm)

C: 1.20" (30.6mm)

See Mechanical Drawing for detailed dimensions

"2S2/0" 2/0 AWG double wire lug, 2/0-14 AWG wire class B/C, and FLEX wire, 1/0-14 AWG, wire class G-K including mm2 class 5, double barrel, aluminum or copper wire, slotted screws, CU9AL, 90C temperature rating, single 1/4" bolt mounting hole,Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. Made in the USA from domestic and imported parts. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. Current and temperature rating subject to the lowest temperature rated conducting part in the assembly.

UL & Canada Approved for FLEX wire Class G-K sizes 1/0-14 AWG

	DIY Mounting Holes™: Cat. No. 2S2/0 Style No. 3
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S2/0 Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

Assembly PDF

Dual/Interlocking Lugs

Three Wire Application

2S2/0 and S2/0

Hardware not included.

Lugs sold individually.

For more interlocking lugs

click here.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.6mm)

C: 0.63" (15.9mm)

See Mechanical Drawing for detailed dimensions

"S2/0" 2/0 AWG single wire lug, 2/0-14 AWG wire class B/C, and FLEX, AWG 1/0-14, wire class G-K class 5, single barrel, aluminum or copper wire, CU9AL, 90C temperature rating, one 1/4" mounting hole, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. Current and temperature rating subject to the lowest temperature rated conducting part in the assembly. IHI Connectors® brand.

UL & Canada Approved for FLEX wire Class G-K sizes 1/0-14 AWG

	DIY Mounting Holes™: Cat. No. S2/0 Style No. ALL
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S2/0 Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

Approved for up to 6 wires

Dimensions

A: 3.13" (79.5mm)

B: 1.56" (39.6mm)

C: 2.50" (63.5mm)

I: 0.63" (7.6mm)

See Mechanical Drawing for detailed dimensions

"3S250TP" 250 kcmil (4/0 AWG) triple wire lug triple barrel, 250 kcmil (4/0 AWG)-6 AWG wire class B/C, multiple wire (dual) per end, FLEX wire, AWG 3/0-6, wire class G-K including mm2 class 5, aluminum or copper wire, CU9AL, 90C temperature rating, single mounting hole, NEMA mounting holes and spacing; this is not a NEMA tested part,Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. With Turn Prevent rib. IHI Connectors® brand. Made in the USA from domestic and imported parts.

UL & Canada Approved for Multiple wires class B, C, 2X AWG 2-6 &2X 25-16 mm2 & (1X) FLEX wire Classes G-K sizes #6-#3/0 AWG

	DIY Mounting Holes™: Cat. No. 2S250 Style No. 2
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 3S250TP Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

250 kcmil-6 gama de cable de AWG, tres cables de aluminio o cobre, la calificación de la temperatura CU9AL, 90C, solo montar hoyo, UL Listó, Canada Certificó. Con la Vuelta Previene costilla. Marca IHI. Hecho en EE.UU. de partes nacionales e importadas.

Approved for up to 6 wires

Dimensions

A: 3.13" (79.5mm)

B: 1.56" (39.6mm)

C: 2.50" (63.5mm)

See Mechanical Drawing for detailed dimensions

"3S250-53-81" 250 kcmil (4/0 AWG) triple wire lug triple barrel, 250 kcmil (4/0 AWG)-6 AWG wire class B/C, multiple wire (dual) per end, class B/C, and single per end,and FLEX, AWG 3/0-6, wire class G-K including mm2 class 5, aluminum or copper wire, CU9AL, 90C temperature rating, single mounting hole, NEMA mounting holes and spacing; this is not a NEMA tested part,Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. IHI Connectors® brand. Made in the USA from domestic and imported parts.

UL & Canada Approved for Multiple wires class B, C, 2X AWG 2-6 &2X 25-16 mm2 & (1X) FLEX wire Classes G-K sizes #6-#3/0 AWG

	DIY Mounting Holes™: Cat. No. 2S250 Style No. 2
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 3S250-53-81 Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Approved for two to four wire use (two wires per barrel)

Dimensions

A: 2.50" (63.5mm)

B: 1.13" (28.7mm)

C: 0.83" (21.1mm)

See Mechanical Drawing for detailed dimensions

Approved for two to four wire use (two wires per barrel)

Dimensions

A: 4.00" (101.6mm)

B: 1.13" (28.7mm)

C: 0.83" (21.1mm)

See Mechanical Drawing for detailed dimensions

4 wires

3 wires

Dimensions

A: 2.56" (65.1mm)

B: 1.19" (30.2mm)

C: 1.63" (41.3mm)

See Mechanical Drawing for detailed dimensions

"2S250" dual: 250 kcmil (4/0 AWG) double wire double barrel lug 6 AWG - (4/0 AWG) 250 kcmil wire range wire class B/C, and FLEX, AWG 3/0-6, wire class G-K class 5, and can hold up to 4 wires, 2 per wire hole. CU9AL, 90C temperature rating, single 3/8" bolt mounting hole, NEMA mounting holes and spacing; this is not a NEMA tested part, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. Made in the USA from domestic and imported parts.

	DIY Mounting Holes™: Cat. No. 2S250 Style No. 1
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S250 Print

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Dimensions

A: 4.31" (109.5mm)

B: 1.38" (35.1mm)

C: 3.00" (76.2mm)

L1: 1.75" (44.5mm)

L2: 0.88" (22.4mm)

See Mechanical Drawing for detailed dimensions

"3-350L6" 350 kcmil triple wire panelboard lug, 350kcmil - 6 AWG wire range, 3" wide, triple barrel, aluminum or copper wire, hex socket screws, CU9AL, 90C temperature rating, NEMA mounting holes and spacing; this is not a NEMA tested part, six mounting holes for 1/2" bolts, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Made in the USA from domestic and imported parts. Brumall Brand.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Comparison between Panelboard and Switchgear

Dimensions

A: 5.06" (128.5mm)

B: 2.90" (73.7mm)

C: 2.47" (62.7mm)

L: 1.38" (35.1mm)

See Mechanical Drawing for detailed dimensions

"600T-3" 600 kcmil triple wire triple barrel panelboard lug, 600 MCM kcmil-2 AWG wire range, sracker type, two tier lug, aluminum or copper wire, CU7AL, 75C temperature rating, 2 mounting holes for 3/8" bolts, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. Brumall brand. Made in the USA from domestic and imported parts.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Comparison between Panelboard and Switchgear

600 MCM kcmil-2 AWG gama de cable, tres cables de aluminio o cobre, la calificación de la temperatura CU9AL, 90C, 2 montar hoyos para cerrojos de 1/2", UL Listó, Canada Certificó. Marca Brumall. Hecho en EE.UU. de partes nacionales e importadas

Dimensions

A: 3.13" (79.5mm)

B: 1.56" (39.6mm)

C: 3.53" (89.7mm)

L: 2.00" (50.8mm)

See Mechanical Drawing for detailed dimensions

"3-600T" 600 kcmil triple wire triple barrel panelboard lug, 600 MCM kcmil-2 AWG wire range, aluminum or copper wire, CU9AL, 90C temperature rating, 2 mounting holes for 1/2" bolts, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. Brumall brand. Made in the USA from domestic and imported parts.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Comparison between Panelboard and Switchgear

600 MCM kcmil-2 AWG gama de cable, tres cables de aluminio o cobre, la calificación de la temperatura CU9AL, 90C, 2 montar hoyos para cerrojos de 1/2", UL Listó, Canada Certificó. Marca Brumall. Hecho en EE.UU. de partes nacionales e importadas

Dimensions

A: 4.91" (124.7mm)

B: 3.00" (76.2mm)

C: 2.63" (66.8mm)

L: 1.38" (35.1mm)

See Mechanical Drawing for detailed dimensions

"800T-3" 800 kcmil triple wire triple barrel panelboard lug, 800-300 MCM kcmil wire range, stacker type, two tier lug, aluminum or copper wire, CU7AL, 75C temperature rating, 2 mounting holes for 3/8" bolts, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. Brumall brand. Made in the USA from domestic and imported parts.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Comparison between Panelboard and Switchgear

800-300 MCM kcmil gama de cable, tres cables de aluminio o cobre, la calificación de la temperatura CU7AL, 75C, 2 montar hoyos para cerrojos de 3/8", UL Listó, Canada Certificó. Marca Brumall. Hecho en EE.UU. de partes nacionales e importadas