LugsDirect.com
 Operated By:
Advancement International Ltd.
595 Circlewood, Aurora, OH 44202(USA)
Email: sales@LugsDirect.com
Phone: 330-562-8983 | FAX: 330-562-9990
Connectors Inc.

IHIConnectors

 Brumall Manufacturing Corp.

Brumall Manufacturing

Corp.

 Greaves Corp.

Greaves

Electrical Connectors

 Hillsdale TerminalsHillsdale Terminal

Accepted forms of payment:

Made in the USA

Made in the USA
from Domestic and Imported Parts

 

Printed Circuit Board Power Connectors
Technical Information

 

Select a category or scroll down.

 

B2A and B2C PCBs | Shunt Applications | Bus Bar Mounts

 

Top Wire Access PCBs | B12-PCB-S | Wave Solder Profile

 

Further Information and Links

 

 

B2A and B2C PCB Terminals

High Amp PCB lug For 2 AWG -14 AWG Copper or 2-8 AWG Aluminum Wire


STOCKED THT Solder Mounted Wire lugs for PCB's
High Amp PCB Connectors, B2 Series

 

UL/Canada Catalog Number "B2" and "B2C"
UL Recognized: Certs Link
Canada Certified: Certs Link

 

High Amp (115 Amp NEC 75C rating) PCB Connectors, ideal for electronic power invertors, solar energy controllers, battery charger controllers, wind energy controllers, high wattage heater controllers, current controllers, power supplies, lightning arresters, and any high amperage application with up to 100 amps per connector with properly sized printed circuit board layout.

 

Part Image Part Family
(cat no.)		 AWG AMP Screw Entrance Screw Type Options Mount Style

B2A

 

(Cat. No. B2)

(2)3-14 AWG

 (115A) 100A SIDE / TOP Slotted,
Hex Socket,
Stainless Steel		 2 LEGS 
.24 X .05
(6.1X1.3mm)

PCB penetration
0.16" 4mm
See B2A's

B2A

 

(Cat. No. B2)

 (2)3-14 AWG (115A) 100A SIDE / TOP
@ 45o angle		 Slotted,
Hex Socket,
Stainless Steel		 2 LEGS 
.24 X .05
(6.1X1.3mm)

PCB penetration
.09" 2.2mm
See B2A's with 45o angle staple & .09" PCB penetration

B2A

 

(Cat. No. B2)

 (2)3-14 AWG (115A) 100A SIDE / TOP
@ 45o angle		 Slotted,
Hex Socket,
Stainless Steel		 2 LEGS 
.24 X .05
(6.1X1.3mm)

PCB penetration
0.12" 3.0mm
See B2A's with 45o angle staple & .12" PCB penetration

B2A

 

(Cat. No. B2)

 (2)3-14 AWG (115A) 100A SIDE / TOP
@ 45o angle		 Slotted,
Hex Socket,
Stainless Steel		 2 LEGS 
.24 X .05
(6.1X1.3mm)

PCB penetration
0.175" 4.4mm
See B2A's with 45o angle staple & .175" PCB penetration

B2C

 

(Cat. No. B2C)

 2-14 AWG 115A SIDE / TOP Slotted,
Hex Socket,
Stainless Steel		 2 LEGS 
.24 X .05
(6.1X1.3mm)

0.16" 4mm PCB penetration
See B2C's

B2C

 

(Cat. No. B2C)

 2-14 AWG 115A SIDE / TOP
@ 45o angle		 Slotted,
Hex Socket,
Stainless Steel		 2 LEGS 
.24 X .05
(6.1X1.3mm)

PCB penetration
.09" 2.2mm
See B2C's with 45o angle staple & .09" PCB penetration

B2C

 

(Cat. No. B2C)

 2-14 AWG 115A SIDE / TOP
@ 45o angle		 Slotted,
Hex Socket,
Stainless Steel		 2 LEGS 
.24 X .05
(6.1X1.3mm)

PCB penetration
0.12" 3.0mm
See B2C's with 45o angle staple & .12" PCB penetration

B2C

 

(Cat. No. B2C)

 2-14 AWG 115A SIDE / TOP
@ 45o angle		 Slotted,
Hex Socket,
Stainless Steel		 2 LEGS 
.24 X .05
(6.1X1.3mm)

PCB penetration
0.175" 4.4mm
See B2C's with 45o angle staple & .175" PCB penetration

 

B2A and B2C Features

 

B2A-2-PCB, 2AWG - 14AWG High AMP PCB wire lugB2A-PCB-PT

B2A-PCB-PT | B2C-PCB-PT

Super Heavy Duty PCB Terminals for High Current Applications (115A ) and Current Shunting

 

See PCB-PT Lugs
 

B2A-2PCBB2A-2PCB

B2A-2PCB

100+ Amp Current shunt /heat sink / zero ohm trace jumper for other locations on the PCB such as narrowed traces, or hot spots.

 

Part No. B2A-2PCB
 

Twin Pair Shunt

Twinned Pair of B2C-PCBs

B2A-PCB Print for Loop Through Shunt Pair

Click for How to Use an IHI Current Shunt for a Twinned Pair of B2A-PCB or B2C-PCB

 

100+ Amp current shunt between two (or more) wire connector terminals for high pass-through currents.

Copper PCB Current-Heat Shunt

Part No. 14257
B2A or B2C with triple shunt loop through

Or Here for How to Use an IHI Current Shunt for Three Triple Set of B2A-PCB or B2C-PCB Wire Terminal

 

100+ Amp current shunt between two (or more) wire connector terminals for high pass-through currents.

Copper PCB Current-Heat Shunt

Part No. 14257
 

 

High Conductivity PCB Current Shunts (zero ohm jumpers)
PT257

PT-SHUNT PCB terminal shunt for 100 amps

 

100+ Amp Current shunt /heat sink / zero ohm trace jumper for other locations on the PCB such as narrowed traces, or hot spots.

 

(1) PER (2) B2A-PCB

 

Part No. PT257

 

See All PCB Shunts and Jumpers

More Technical information on High Amp PCB Wire Connectors

 

More Technical information about High Amp Wide Trace PCB design

 
 

Click here for chart of heat rise 115 amps B2A-PCB & B2C-PCB Terminals

Click for chart of IHI B2A-PCB & B2C-PCB Temperature rise with 115 Amps, 85 Amps, 65 Amps, 50 Amps using #2 AWG Wire.
 

B2A-PCB Shown beside two routed slots in
a double sided .06 inch , 1.5mm circuit board

B2A-PCB with wire.


Bus Bar Mounted PCB Lugs

 

SMT & Through Hole Bus Bar Mounts 65-115 amps continuous.

Also for Any length Zero Ohm Shunts and Jumpers.

 

Suitable for Any Length of Copper Bus Bar. Can accomodate any number of mounts at any interval. "Slide along and clamp" design enables maximum flexibility. Copper bus expands at the same rate as copper PCB foils to minimize warping.
 

torque test

Test: 30 in-lbs, no copper delamination

Part Number B6A-PCB-SS

Through Hole & SMT Bus Mount Part numbers:

 

Through Hole .25" X .25" Max. Rectangular Bus...B2A-PCB (Stock)
Through Hole .19" Max. Round Bus......................B6A-PCB (Stock)

SMT .25" X .25" Max. Rectangular Bus.....B2A-SMT (2-4 weeks)
SMT .19" Max. Round Bus....................B6A-PCB (Stock)

 

Stock THT PCBs

 

Stock SMT PCBs

 

SurfaceMount SMT Any Length PCB Bus Bar Mounts Through The hole PCB Wave solderable Bus Bar Mounts

 

PART Number: B2A-PCB or B2C-PCB

"slide-along" Through-Hole PCB Bus Mounts - Use with .24" X .032" t0 .050" thick copper bus strip or wire up to 2 AWG (bare or insulated)

2 or 3 or more bus mounts - slide along and through hole or SMT attachment available


PART Number: B2A-PCB or B2C-PCB

"slide-along" Through-Hole PCB Bus Mounts - Use with .24" X .032" t0 .050" thick copper bus strip or wire up to 2 AWG (bare or insulated)

 



 

 

B6A-PCB-SSB6A-PCB-SS Field Wiring TerminalsB6A-PCB-45-RS,B4A-PCB-45-RS TOP_ACCESS_PCB_TERMINALS

1) B6A-PCB-SS, 2) Horizontal wire entrance, 3) Top wire access version B6A-PCB-45

B6A-PCB-SS

 

All-in-one Miniature AWG#6 Solderable PCB Wire Terminal Lug with Stainless Steel Slotted Screw for Rust Free finish.

View Catalog Page

 

Mechanical Drawing

 

Spec sheet

 

Purchase B6A-PCB-SS

 

 

Through Hole Technology Soldering

 

IHI Connectors brand B6A-PCB Wave Soldered PCB terminal connector lug

Click for SAC Lead Free Wave Soldering Profile
Click for typical wave soldering profile suitable for IHI PCB lugs

 

 
CLICK HERE to purchase B6A-PCB

 


TOP WIRE ACCESS PCB TERMINALS

 

For "Inboard" locations near to centrally located power semiconductors. Board-to-board wiring and field wiring. Wire and wire clamping from the top. Also for point to point current power bus or shunt ("Zero ohm") applications.

Through hole PCB terminal with TOP ACCESS WIRE ENTRYTop Access PCB Wire terminal Lug B6A-PCB-45-RS & B4A-PCB-45-RS

 

B6A-PCB-45-RS (6-14-18 AWG) Top Wire Access, Through Hole Wave Solder Mount

B4A-PCB-45-RS (4-14 AWG) Top Wire Access, Through Hole Wave Solder Mount

 

 

B12-PCB-S

 

"B12-PCB-S" AWG #12-16 solderable wire Terminal lug

B12-PCB Wave solderable 12AWH wire terminal for PCB mounting
 (click for pdf)

CLICK HERE to purchase B12-PCB-S


High Amp PCB Lug and Terminal Links and Discussion items:

 

1/4"-28 Slotted Screw Driver Bit Guide (as found in the S6, P4, B6A-PCB, and B4A-PCB parts)

 

5/16"-24 Slotted Screw Driver Bit Guide (as found in the B2C-PCB parts)

 

Aluminum Screw Driver Tip Guide

 

Do's and Don’ts for High Amp Wide Trace PCB

 

High Amp PCB Wire Connectors

 

High Current PCB Connectors

 

IHI THT PCB Wire Lugs Catalog

 

Notes on PCB Footprint Layouts – SMT/SMD Mode

 

PCB Shunts and Jumpers Catalog

 

Precautions When Using SMT / SMD

 

Shelf Life and Storage Condtions for IHI Parts 

 

Soldering Recommendations for IHI Aluminum Sn/Ni Plated Terminal Lugs 

 

Soldering Temperature Profiles

 

Surface Mount Technology FAQ

 

Through Hole Technology (THT) PCB Cut Out Catalog

 

Temperature Range and Temperature Rating for IHI PCB Connectors

 

Use of THT High Current Wire Connectors with IMS PCB

 

Copyright © 2024 Advancement International Ltd, Aurora Ohio - All Rights Reserved
Advancement International Ltd is a registered company of Ohio, USA
IHI® is the Registered Trademark of International Hydraulics Inc.
LugsDirect.com is owned and operated by Advancement International Ltd.
DUNS # 148692197, REGISTERED WITH CCR, CAGE / NCAGE NUMBER 5A6R9,
A2 WOMAN OWNED SMALL BUSINESS, NAICS 423610, SIC 3643,
Made in the USA from domestic and imported parts. USMCA CERTIFICATES AVAILABLE