IHIConnectors

Accepted forms of payment:

Assembly PDF

Dual Interlocking Lugs/ Eight Wire Application

Hardware not included. Lugs sold individually.

For more interlocking lugs click here.

Dimensions

A: 1.16" (29.4mm)

B: 0.56" (14.3mm)

C: 2.06" (52.4mm)

L: 1.06" (27.0mm)

See Mechanical Drawing for detailed dimensions

"4S2-HEX" 2 AWG Quadruple wire lug, 2-14 AWG wire range, Multiple (dual) wire wire class B/C and FLEX, 4-12 AWG, 25mm2-4mm2, wire class G-K including mm2 class 5, four barrel, aluminum or copper wire, CU9AL, 90C temperature rating, two 5/16" (8mm) dia. bolt mounting holes, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. Made in the USA from domestic and imported parts. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. IHI Connectors® brand.

Aluminum screw option available. Email sales@lugsdirect.com for details and pricing

	DIY Mounting Holes™: Cat. No. S2 Style No. ALL
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 4S2-HEX Print   For lugs without a mounting hole email sales@lugsdirect.com. Large MOQ and long lead time for lugs without mounting hole.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

UL & Canada Approved for FLEX wire Class wire class G-K sizes 1/0-14 AWG

**TORK KRIMP® Method for clamping wires using uncrimped ferrules is protected under Patent No. 10630005. Full instructions for self crimping ferrules here.

Dimensions

A: 2.50" (63.5mm)

B: 0.50" (12.7mm)

C: 0.56" (14.3mm)

See Mechanical Drawing for detailed dimensions

"4S2-N-21-2" 2 AWG Quadruple wire lug, 2-14 AWG wire range, Multiple (dual) wire class B/C and FLEX, 4-12 AWG, 25mm2-4mm2, wire class G-K including mm2 class 5,four barrel, aluminum or copper wire, CU9AL, 90C temperature rating, two #10 bolt mounting holes, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. Made in the USA from domestic and imported parts. International Hydraulics Inc® brand.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

**TORK KRIMP® Method for clamping wires using uncrimped ferrules is protected under Patent No. 10630005. Full instructions for self crimping ferrules here.

Assembly PDF

Dual Interlocking Lugs/

Four Wire Application

Hardware not included.

Lugs sold individually.

For more interlocking lugs

click here.

Dimensions

A: 1.16" (29.4mm)

B: 0.56" (14.3mm)

C: 1.00" (25.4mm)

See Mechanical Drawing for detailed dimensions

"2S2" 2 AWG double wire lug 2-14 AWG wire range, Multiple (dual) wire wire class B/C and FLEX, 4-12 AWG, 25mm2-4mm2, wire class G-K including mm2 class 5, 2 barrel, aluminum or copper wire, CU9AL, 90C temperature rating, single 5/16" (8mm) dia. bolt mounting hole, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. Made in the USA from domestic and imported parts. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV.

Aluminum screw option available. Email sales@lugsdirect.com for details and pricing

	DIY Mounting Holes™: Cat. No. S2 Style No. ALL
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S2 Print   For lugs without a mounting hole email sales@lugsdirect.com. Large MOQ and long lead time for lugs without mounting hole.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

UL & Canada Approved for FLEX wire Class wire class G-K sizes 1/0-14 AWG

**TORK KRIMP® Method for clamping wires using uncrimped ferrules is protected under Patent No. 10630005. Full instructions for self crimping ferrules here.

Dimensions

A: 1.63" (41.4mm)

B: 0.56" (14.2mm)

C: 1.00" (25.4mm)

L: 0.50" (12.7mm)

See Mechanical Drawing for detailed dimensions

"S2-NB-2" 2 AWG quadruple wire lug, Multiple (dual) wire wire class B/C and FLEX, 4-12 AWG, 25mm2-4mm2, wire class G-K including mm2 class 5, Four 4 barrel /wires (4) 2-14AWG wire range, slotted screws, Grounding or Power Distribution or Power Collection Lug.UL Listed for General Use including grounding in dry locations. Up to Four wires (4 conductors) aluminum or copper wire, CU9AL, 90C temperature rating, two (2) #10 Bolt mounting holes , Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. IHI Connectors® brand. Made in the USA from domestic and imported parts.
Total current rating with 4 full size copper wires 460 Amps (75C).

GENERAL POWER AND CERTAIN GROUNDING USE UL LISTED LUG, wire rated current capacity.

Aluminum screw option available. Email sales@lugsdirect.com for details and pricing

	DIY Mounting Holes™: Cat. No. S2 Style No. ALL
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S2-NB-2 Print   For lugs without a mounting hole email sales@lugsdirect.com. Large MOQ and long lead time for lugs without mounting hole.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

**TORK KRIMP® Method for clamping wires using uncrimped ferrules is protected under Patent No. 10630005. Full instructions for self crimping ferrules here.

Dimensions

A: 1.63" (41.4mm)

B: 0.56" (14.2mm)

C: 1.00" (25.4mm)

L: 0.50" (12.7mm)

See Mechanical Drawing for detailed dimensions

"S2-NB-2-HEX" 2 AWG guadruple wire lug, Four 4 barrel /wires (4) 2-14AWG wire range, Multiple (dual) wire wire class B/C and FLEX, 4-12 AWG, 25mm2-4mm2, wire class G-K including mm2 class 5, Grounding or Power Distribution or Power Collection Lug. UL Listed for General Use including grounding in dry locations. Up to Four wires (4 conductors) aluminum or copper wire, CU9AL, 90C temperature rating, two (2) #10 Bolt mounting holes , Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. IHI Connectors® brand. Made in the USA from domestic and imported parts.
Total current rating with 4 full size copper wires 460 Amps (75C).

GENERAL POWER AND CERTAIN GROUNDING USE UL LISTED LUG, wire rated current capacity.

Aluminum screw option available. Email sales@lugsdirect.com for details and pricing

	DIY Mounting Holes™: Cat. No. S2 Style No. ALL
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S2-NB-2-HEX Print   For lugs without a mounting hole email sales@lugsdirect.com. Large MOQ and long lead time for lugs without mounting hole.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

**TORK KRIMP® Method for clamping wires using uncrimped ferrules is protected under Patent No. 10630005. Full instructions for self crimping ferrules here.

Four wire application

Assembly PDF

Dual Interlocking Lugs/

Three Wire Application

2S1/0 and S1/0

Assembly PDF

Dual/Interlocking Lugs

7-9 Wire Application

2S1/0 and 3S6-2S4-HEX

Hardware not included.

Lugs sold individually.

For more interlocking lugs

click here.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.7mm)

C: 1.13" (28.6mm)

See Mechanical Drawing for detailed dimensions

"2S1/0" 1/0 AWG double wire lug, 1/0-14 AWG wire range, and multiple (dual) wires and FLEX wire, 1-8 AWG, wire class G-K including mm2 class 5, double barrel, aluminum or copper wire, CU9AL, 90C temperature rating, single 1/4" bolt mounting hole, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. Made in the USA from domestic and imported parts. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV.

UL & Canada Approved for Multiple Wires 2X #14 to 2X #4 and (1X) FLEX wire Class wire class G-K sizes #1-#8 AWG
Use of Ferrules (UL Listed) on wires 1-8 AWG

	DIY Mounting Holes™: Cat. No. 2S1/0 Style No. ALL
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S1/0 Print   For lugs without a mounting hole email sales@lugsdirect.com. Large MOQ and long lead time for lugs without mounting hole.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

Approved for up to 4 wires

Assembly PDF

Dual/Interlocking Lugs

7-9 Wire Application

2S1/0-HEX and 3S6-2S4-HEX

Hardware not included.

Lugs sold individually.

For more interlocking lugs

click here.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.7mm)

C: 1.13" (28.6mm)

See Mechanical Drawing for detailed dimensions

"2S1/0-HEX" 1/0 AWG double wire lug, 1/0-14 AWG wire range, and multiple (dual) wires and FLEX wire, 1-8 AWG, wire class G-K including mm2 class 5, double barrel, aluminum or copper wire, CU9AL, 90C temperature rating, single 1/4" bolt mounting hole, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. 3/16" Hex Socket Screw. Made in the USA from domestic and imported parts. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV.

UL & Canada Approved for Multiple Wires 2X #14 to 2X #4 and (1X) FLEX wire Class wire class G-K sizes #1-#8 AWG
Use of Ferrules (UL Listed) on wires 1-8 AWG

	DIY Mounting Holes™: Cat. No. 2S1/0 Style No. ALL
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S1/0-HEX Print   For lugs without a mounting hole email sales@lugsdirect.com. Large MOQ and long lead time for lugs without mounting hole.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

Approved for up to 4 wires

Assembly PDF

Dual/Interlocking Lugs

7-9 Wire Application

2S1/0-HEX-M and 3S6-2S4-HEX-M

For more interlocking lugs

click here.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.7mm)

C: 1.13" (28.6mm)

See Mechanical Drawing for detailed dimensions

Note!!!   This part has a 5mm hex socket for use in metric countries.  

"2S1/0-HEX-M" 1/0 AWG double wire lug, 1/0-14 AWG wire range, and multiple (dual) wires and FLEX wire, 1-8 AWG, wire class G-K including mm2 class 5, double barrel, aluminum or copper wire, CU9AL, 90C temperature rating, single 1/4" bolt mounting hole, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. 5mm Hex Socket Screw. Made in the USA from domestic and imported parts. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV.

UL & Canada Approved for Multiple Wires 2X #14 to 2X #4 and (1X) FLEX wire Class wire class G-K sizes #1-#8 AWG
Use of Ferrules (UL Listed) on wires 1-8 AWG, Also class 2 & 5 mm2 sizes single and dual per rating label.

	DIY Mounting Holes™: Cat. No. 2S1/0 Style No. ALL
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S1/0-HEX-M Print   For lugs without a mounting hole email sales@lugsdirect.com. Large MOQ and long lead time for lugs without mounting hole.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Assembly PDF

Dual Interlocking Lugs/

Four Wire Application

Hardware not included.

Lugs sold individually.

For more interlocking lugs

click here.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.7mm)

C: 1.20" (30.6mm)

L: 0.64" (16.3mm)

See Mechanical Drawing for detailed dimensions

"2S2/0-31-42" 2/0 AWG metric double wire lug, 2/0-14 AWG wire range, and FLEX wire, 1/0-14 AWG, wire class G-K including mm2 class 5, 2 barrel, aluminum or copper wire, CU9AL, 90C temperature rating, TURN PREVENT USING TWO 1/4" bolts (hole is .315 +/-.007) mounting holes, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. Made in the USA from domestic and imported parts. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV.

	DIY Mounting Holes™: Cat. No. 2S2/0 Style No. 3
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S2/0-31-42 Print   For lugs without a mounting hole email sales@lugsdirect.com. Large MOQ and long lead time for lugs without mounting hole.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

Assembly PDF

Dual Interlocking Lugs/

Four Wire Application

Hardware not included.

Lugs sold individually.

For more interlocking lugs

click here.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.7mm)

C: 1.20" (30.6mm)

L: 0.64" (16.3mm)

See Mechanical Drawing for detailed dimensions

"2S2/0-31-42-HEX" 2/0 AWG metric double wire lug, 2/0-14 AWG wire range, and FLEX wire, 1/0-14 AWG, wire class G-K including mm2 class 5, 2 barrel, aluminum or copper wire, CU9AL, 90C temperature rating, TURN PREVENT USING TWO 1/4" bolts (hole is .315 +/-.007) mounting holes, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. Made in the USA from domestic and imported parts. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV.

	DIY Mounting Holes™: Cat. No. 2S2/0 Style No. 3
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S2/0-31-42-HEX Print   For lugs without a mounting hole email sales@lugsdirect.com. Large MOQ and long lead time for lugs without mounting hole.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

Assembly PDF

Dual Interlocking Lugs/

Four Wire Application

Hardware not included.

Lugs sold individually.

For more interlocking lugs

click here.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.7mm)

C: 1.20" (30.6mm)

L: 0.64" (16.3mm)

See Mechanical Drawing for detailed dimensions

Note!!!   This part has a 5mm hex socket for use in metric countries.

"2S2/0-31-42-HEX-M" 2/0 AWG metric double wire lug, 2/0-14 AWG wire range, and FLEX wire, 1/0-14 AWG, wire class G-K including mm2 class 5, double barrel, aluminum or copper wire, CU9AL, 90C temperature rating, TURN PREVENT USING TWO 1/4" bolts (hole is .315 +/-.007) mounting holes, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. Made in the USA from domestic and imported parts. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV.

	DIY Mounting Holes™: Cat. No. 2S2/0 Style No. 3
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S2/0-31-42-HEX-M Print   For lugs without a mounting hole email sales@lugsdirect.com. Large MOQ and long lead time for lugs without mounting hole.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

Approved for two to four wire use (two wires per barrel)

Dimensions

A: 2.50" (63.5mm)

B: 1.13" (28.7mm)

C: 0.83" (21.1mm)

See Mechanical Drawing for detailed dimensions

Approved for two to four wire use (two wires per barrel)

Dimensions

A: 4.00" (101.6mm)

B: 1.13" (28.7mm)

C: 0.83" (21.1mm)

See Mechanical Drawing for detailed dimensions

4 wires

3 wires

Assembly PDF

Dual/Interlocking Lugs

4-6 Wire Application

2LS500-TP-41-59

and 2S250

Hardware not included.

Lugs sold individually.

For more interlocking lugs

click here.

Dimensions

A: 2.56" (65.1mm)

B: 1.19" (30.2mm)

C: 1.63" (41.3mm)

See Mechanical Drawing for detailed dimensions

Compact Multi-Wire Lug
to hold 3 or 4 wires

"2S250" dual: 250 kcmil (4/0 AWG)-6 AWG wire range and FLEX wire, 3/0-6 AWG, wire class G-K including mm2 class 5, standard copper wire only, and can hold up to 4 wires, 2 per wire hole. CU9AL (250kcmil (4/0 AWG) wire lug), 90C temperature rating, single 3/8" bolt mounting hole, NEMA mounting holes and spacing; this is not a NEMA tested part, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. International Hydraulics Inc. Made in the USA from domestic and imported parts.

	DIY Drill Mounting Holes: Cat. No. 2S250 Style No.1
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S250 Print   For lugs without a mounting hole email sales@lugsdirect.com. Large MOQ and long lead time for lugs without mounting hole.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make complete contact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

Approved for up to 6 wires

Dimensions

A: 3.13" (79.5mm)

B: 1.56" (39.6mm)

C: 2.50" (63.5mm)

I: 0.63" (16.0mm)

See Mechanical Drawing for detailed dimensions

"3S250TP" 250 kcmil (4/0 AWG) triple wire lug triple barrel, 250 kcmil (4/0 AWG)-6 AWG wire range, multiple wire (dual) per end, wire class B/C, and single per end, and FLEX wire, 3/0-6 AWG, wire class G-K including mm2 class 5, aluminum or copper wire, CU9AL, 90C temperature rating, single mounting hole, NEMA mounting holes and spacing; this is not a NEMA tested part,Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. With Turn Prevent rib. 
IHI Connectors® brand. Made in the USA from domestic and imported parts.

UL & Canada Approved for Multiple wires class B, C, 2X AWG 2-6 &2X 25-16 mm2 & (1X) FLEX wire Classes wire class G-K sizes #6-#3/0 AWG

	DIY Mounting Holes™: Cat. No. 2S250 Style No. 2
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 3S250TP Print   For lugs without a mounting hole email sales@lugsdirect.com. Large MOQ and long lead time for lugs without mounting hole.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

250 kcmil-6 gama de cable de AWG, tres cables de aluminio o cobre, la calificación de la temperatura CU9AL, 90C, solo montar hoyo, UL Listó, Canada Certificó. Con la Vuelta Previene costilla. Marca IHI. Hecho en EE.UU. de partes nacionales e importadas.

Assembly PDF

Dual/Interlocking Lugs Eight Wire Application

Hardware not included.

Lugs sold individually.

Dimensions

A: 2.88" (73.2mm)

B: 1.25" (31.8mm)

C: 3.98" (101.1mm)

L: 1.75" (44.5mm)

See Mechanical Drawing for detailed dimensions

"4S350-56-88-HEX" 350 kcmil quadruple wire panelboard lug, 350kcmil-6 AWG wire range, FLEX, 262 kcmil-2 AWG, wire class G-K including mm2 class 5, panel Lug. Four barrel / wires (4 conductors) aluminum or copper wire, CU9AL, 90C temperature rating, two 1/2" bolt mounts at 1 3/4" or at 2" centers, NEMA mounting holes and spacing; this is not a NEMA tested part, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. IHI Connectors® brand. Made in the USA from domestic and imported parts. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV.

	DIY Mounting Holes™: Cat. No. 2S350 Style No. ALL
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 4S350-56-88-HEX Print   For lugs without a mounting hole email sales@lugsdirect.com. Large MOQ and long lead time for lugs without mounting hole.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Comparison between Panelboard and Switchgear

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

"4S350-56-88-HEX" 350kcmil - 6 rango de cable , el panel lug . Cuatro barril / cables ( 4 conductores ) de aluminio o cobre alambre, CU9AL , 90C clasificación de temperatura , dos 1/2 " montajes de perno de 1 3/4 " o en 2 centros " . Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, marca certificación Canada . IHI . Hecho en los EE.UU

Dimensions

A: 4.31" (109.5mm)

B: 1.38" (35.1mm)

C: 4.02" (102.1mm)

L: 1.75" (44.5mm)

See Mechanical Drawing for detailed dimensions

"4-350L4" 350 kcmil Quadruple wire panelboard lug, 350kcmil - 6 AWG wire range, 4.016" wide, four barrel, aluminum or copper wire, hex socket screws, CU9AL, 90C temperature rating, NEMA mounting holes and spacing; this is not a NEMA tested part, two 1/2" bolt mounting holes, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. Made in the USA from domestic and imported parts. Brumall Brand.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Comparison between Panelboard and Switchgear

Dimensions

A: 2.50" (63.5mm)

B: 1.50" (38.1mm)

C: 2.22" (56.4mm)

See Mechanical Drawing for detailed dimensions

"2P500" 500 kcmil splicer reducer wire lug, 500kcmil-6 AWG wire range, aluminum or copper wire, splicer or reducer CU7AL, 75C temperature rating, two mounting holes, for mounting to insulator from bottom if needed, or wire insertion "sight" holes, or wire stop hole, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application. Hex socket screws. IHI Connectors® brand. Made in the USA from domestic and imported parts.

Quad Splicer Reducer Distribution

3X or 4 X 500kcmil-6AWG wires (see part P500 for 2X)

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Dimensions

A: 5.06" (128.5mm)

B: 2.90" (73.7mm)

C: 2.47" (62.7mm)

L: 1.38" (35.1mm)

See Mechanical Drawing for detailed dimensions

"600T-4" 600 kcmil quadruple wire panelboard lug, 600 kcmil-2 AWG wire range, panel Lug. Stacker type, two tier lug. Four barrel /wires (4 conductors) aluminum or copper wire, CU7AL, 75C temperature rating, two 2 mounting holes , Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. Brumall brand. Made in the USA from domestic and imported parts.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Comparison between Panelboard and Switchgear

Cuatro 4 conductores. Gama de cable 600 kcmil -2 de AWG, cuatro cables de aluminio o cobre, la calificación de la temperatura CU7AL, 75C, dos montar hoyos, UL Listó, Canada Certificó. Marca Brumall, Hecho en EE.UU. de partes nacionales e importadas.

Dimensions

A: 4.91" (124.7mm)

B: 3.00" (76.2mm)

C: 2.63" (66.8mm)

L: 1.38" (35.1mm)

See Mechanical Drawing for detailed dimensions

"800T-4" 800 kcmil quadruple wire panelboard lug, 800-300 kcmil wire range, panel Lug. Stacker type, two tier lug. Four barrel / wires (4 conductors) aluminum or copper wire, CU7AL, 75C temperature rating, two 2 mounting holes , Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. Brumall brand. Made in the USA from domestic and imported parts.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Comparison between Panelboard and Switchgear

Cuatro 4 conductores. Gama de cable 800-300 kcmil, cuatro cables de aluminio o cobre, la calificación de la temperatura CU7AL, 75C, dos montar hoyos, UL Listó, Canada Certificó. Marca Brumall. Hecho en EE.UU. de partes nacionales e importadas.