IHIConnectors

Accepted forms of payment:

Assembly PDF

Dual Interlocking Lugs

Four Wire Application

Hardware not included.

Lugs sold individually.

For more interlocking lugs click here.

Dimensions

A: 1.16" (29.4mm)

B: 0.56" (14.3mm)

C: 1.00" (25.4mm)

See Mechanical Drawing for detailed dimensions

"2S2" 2 AWG double wire lug, 2-14 AWG wire range, Multiple (dual) wire class B/C and FLEX, 4-12 AWG, 25mm2-4mm2, wire class G-K including mm2 class 5, double barrel, aluminum or copper wire, CU9AL, 90C temperature rating, single 5/16" (8mm) dia. bolt mounting hole, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. Made in the USA from domestic and imported parts. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. Current and temperature rating subject to the lowest temperature rated conducting part in the assembly.

Screwdriver Bit Information

Aluminum screw option available. Email sales@lugsdirect.com for details and pricing

	DIY Mounting Holes™: Cat. No. S2 Style No. ALL
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S2 Print   For lugs without a mounting hole email sales@lugsdirect.com. Large MOQ and long lead time for lugs without mounting hole.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

**TORK KRIMP® Method for clamping wires using uncrimped ferrules is protected under Patent No. 10630005. Full instructions for self crimping ferrules here.

Assembly PDF

Dual Interlocking Lugs

Four Wire Application

Hardware not included.

Lugs sold individually.

For more interlocking lugs click here.

Dimensions

A: 1.16" (29.4mm)

B: 0.56" (14.3mm)

C: 1.00" (25.4mm)

See Mechanical Drawing for detailed dimensions

"2S2-HEX" 2 AWG double wire lug, 2-14 AWG wire range, Multiple (dual) wire class B/C and FLEX, 4-12 AWG, 25mm2-4mm2, wire class G-K including mm2 class 5, double barrel, aluminum or copper wire, CU9AL, 90C temperature rating, single 5/16" (8mm) dia. bolt mounting hole, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. Current and temperature rating subject to the lowest temperature rated conducting part in the assembly. Made in the USA from domestic and imported parts.

Aluminum screw option available. Email sales@lugsdirect.com for details and pricing

	DIY Mounting Holes™: Cat. No. S2 Style No. ALL
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S2-HEX Print   For lugs without a mounting hole email sales@lugsdirect.com. Large MOQ and long lead time for lugs without mounting hole.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

**TORK KRIMP® Method for clamping wires using uncrimped ferrules is protected under Patent No. 10630005. Full instructions for self crimping ferrules here.

Approved for three and four wire applications. (Two #10, #12, or #14 wires acceptable. No mixing.)

Dimensions

A: 1.21" 30.7mm)

B: 0.56" (14.2mm)

C: 0.46" (11.7mm)

See Mechanical Drawing for detailed dimensions

"P2" 2 AWG splicer reducer wire lug, 2-14 AWG wire range, singles, and multiples of wires, wire class B/C: 2x #10, 2x #12 or 2x #14 wires, aluminum or copper wire, and FLEX, 4-12 AWG, 4-16 with ferrule**, wire class G-K including mm2 class 5, splicer or reducer CU9AL, 90C temperature rating, single #10 bolt clearance mounting hole or wire insertion "sight" hole, or wire stop hole, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application. IHI Connectors® brand. Made in the USA from domestic and imported parts.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

**TORK KRIMP® Method for clamping wires using uncrimped ferrules is protected under Patent No. 10630005. Full instructions for self crimping ferrules here.

Approved for three and four wire applications. (Two #10, #12, or #14 wires acceptable. No mixing.)

Dimensions

A: 1.21" 30.7mm)

B: 0.56" (14.2mm)

C: 0.46" (11.7mm)

See Mechanical Drawing for detailed dimensions

"P2-HEX" 2 AWG splicer reducer wire lug, 2-14 AWG wire range, singles, and multiples of wires, wire class B/C: 2x #10, 2x #12 or 2x #14 wires, and FLEX, 4-12 AWG, 4-16 with ferrule**, wire class G-K including mm2 class 5, aluminum or copper wire, splicer or reducer CU9AL, 90C temperature rating, single #10 bolt clearance mounting hole or wire insertion "sight" hole, or wire stop hole, 1/8" Hex socket screw. Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application. IHI Connectors® brand. Made in the USA from domestic and imported parts.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

**TORK KRIMP® Method for clamping wires using uncrimped ferrules is protected under Patent No. 10630005. Full instructions for self crimping ferrules here.

Four wire application

Assembly PDF

Dual Interlocking Lugs/

Three Wire Application

2S1/0 and S1/0

Assembly PDF

Dual/Interlocking Lugs

7-9 Wire Application

2S1/0 and 3S6-2S4-HEX

Hardware not included.

Lugs sold individually.

For more interlocking lugs click here.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.7mm)

C: 1.13" (28.6mm)

See Mechanical Drawing for detailed dimensions

"2S1/0" 1/0 AWG double wire lug, 1/0-14 AWG wire range, and multiple (dual) wire class B/C and FLEX wire, 1-8 AWG, wire class G-K including mm2 class 5, double barrel, aluminum or copper wire, CU9AL, 90C temperature rating, single 1/4" bolt mounting hole, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. Made in the USA from domestic and imported parts. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. Current and temperature rating subject to the lowest temperature rated conducting part in the assembly. "Drop-In" Replacement for Homac AD-125 and Panduit LAM2A1/0-14-6.

UL & Canada Approved for Multiple Wires 2X #14 to 2X #4 and (1X) FLEX wire Class G-K sizes #1-#8 AWG
Use of Ferrules (UL Listed) on wires 1-8 AWG

	DIY Mounting Holes™: Cat. No. 2S1/0 Style No. ALL
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S1/0 Print   For lugs without a mounting hole email sales@lugsdirect.com. Large MOQ and long lead time for lugs without mounting hole.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

Approved for up to 4 wires

Assembly PDF

Dual/Interlocking Lugs

7-9 Wire Application

2S1/0-HEX and 3S6-2S4-HEX

Hardware not included.

Lugs sold individually.

For more interlocking lugs click here.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.7mm)

C: 1.13" (28.6mm)

See Mechanical Drawing for detailed dimensions

"2S1/0-HEX" 1/0 AWG double wire lug, 1/0-14 AWG wire range, and multiple (dual) wire class B/C and FLEX wire, 1-8 AWG, wire class G-K including mm2 class 5, double barrel, aluminum or copper wire, CU9AL, 90C temperature rating, single 1/4" bolt mounting hole, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. 3/16" Hex Socket Screw. Made in the USA from domestic and imported parts. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. Current and temperature rating subject to the lowest temperature rated conducting part in the assembly.

UL & Canada Approved for Multiple Wires 2X #14 to 2X #4 and (1X) FLEX wire Class G-K sizes #1-#8 AWG
Use of Ferrules (UL Listed) on wires 1-8 AWG

	DIY Mounting Holes™: Cat. No. 2S1/0 Style No. ALL
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S1/0-HEX Print   For lugs without a mounting hole email sales@lugsdirect.com. Large MOQ and long lead time for lugs without mounting hole.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

Approved for up to 4 wires

Assembly PDF

Dual/Interlocking Lugs

7-9 Wire Application

2S1/0-HEX-M and 3S6-2S4-HEX-M

For more interlocking lugs click here.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.7mm)

C: 1.13" (28.6mm)

See Mechanical Drawing for detailed dimensions

Note!!!   This part has a 5mm hex socket for use in metric countries.

"2S1/0-HEX-M" 1/0 AWG metric double wire lug, 1/0-14 AWG wire range, and multiple (dual) wire class B/C and FLEX wire, 1-8 AWG, wire class G-K including mm2 class 5, double barrel, aluminum or copper wire, CU9AL, 90C temperature rating, single 1/4" bolt mounting hole, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. 5mm Hex Socket Screw. Made in the USA from domestic and imported parts. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. Current and temperature rating subject to the lowest temperature rated conducting part in the assembly.

UL & Canada Approved for Multiple Wires 2X #14 to 2X #4 and (1X) FLEX wire Class G-K sizes #1-#8 AWG
Use of Ferrules (UL Listed) on wires 1-8 AWG, Also class 2 & 5 mm2 sizes single and dual per rating label.

	DIY Mounting Holes™: Cat. No. 2S1/0 Style No. ALL
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S1/0-HEX-M Print   For lugs without a mounting hole email sales@lugsdirect.com. Large MOQ and long lead time for lugs without mounting hole.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Approved for two wire use

Assembly PDF

Dual Interlocking Lugs/

Three Wire Application

2S1/0 and S1/0

Assembly PDF

Dual/Interlocking Lugs

6-7 Wire Application

S1/0 and 3S6-2S4-HEX

Hardware not included.

Lugs sold individually.

For more interlocking lugs click here.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.6mm)

C: 0.63" (15.9mm)

See Mechanical Drawing for detailed dimensions

"S1/0" 1/0 AWG Single wire lug, 1/0-14 AWG wire range, Multiple (dual) wire class B/C and FLEX, 1-8 AWG, wire class G-K including mm2 class 5, single barrel, aluminum or copper wire, CU9AL, 90C temperature rating, one mounting hole, slotted screw, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. 1/4" bolt mounting hole. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. Current and temperature rating subject to the lowest temperature rated conducting part in the assembly. IHI Connectors® brand. "Drop-In" Replacement for Homac A-125 and Panduit LAMA1/0-14-Q. Made in the USA from domestic and imported parts.

UL & Canada Approved for Multiple Wires 2X #14 to 2X #4 and (1X) FLEX wire Class G-K sizes #1-#8 AWG
Use of Ferrules (UL Listed) on wires 1-8 AWG

	DIY Mounting Holes™: Cat. No. S1/0 Style No. 1,5
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S1/0 Print   For lugs without a mounting hole email sales@lugsdirect.com. Large MOQ and long lead time for lugs without mounting hole.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make complete contact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

Approved for two wire use

Assembly PDF

Dual Interlocking Lugs/

Three Wire Application

2S1/0 and S1/0

Assembly PDF

Dual/Interlocking Lugs

6-7 Wire Application

S1/0-HEX and 3S6-2S4-HEX

Hardware not included.

Lugs sold individually.

For more interlocking lugs click here.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.6mm)

C: 0.63" (15.9mm)

See Mechanical Drawing for detailed dimensions

"S1/0-HEX" 1/0 AWG Single wire lug, 1/0-14 AWG wire range, Multiple (dual) wire class B/C and FLEX, 1-8 AWG, wire class G-K including mm2 class 5, single barrel, aluminum or copper wire, CU9AL, 90C temperature rating, one mounting hole, 3/16" A/F Hex Socket Drive screw, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. 1/4" bolt mounting hole. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. Current and temperature rating subject to the lowest temperature rated conducting part in the assembly. IHI Connectors® brand. Made in the USA from domestic and imported parts.

UL & Canada Approved for Multiple Wires 2X #14 to 2X #4 and (1X) FLEX wire Class G-K sizes #1-#8 AWG
Use of Ferrules (UL Listed) on wires 1-8 AWG

	DIY Mounting Holes™: Cat. No. S1/0 Style No. 1,5
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S1/0-HEX Print   For lugs without a mounting hole email sales@lugsdirect.com. Large MOQ and long lead time for lugs without mounting hole.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make complete contact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

Approved for two wire use

Assembly PDF

Dual Interlocking Lugs/

Three Wire Application

2S1/0 and S1/0

Assembly PDF

Dual/Interlocking Lugs

6-7 Wire Application

S1/0-HEX-M and 3S6-2S4-HEX-M

For more interlocking lugs click here.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.6mm)

C: 0.63" (15.9mm)

See Mechanical Drawing for detailed dimensions

Note!!!   This part has a 5mm hex socket for use in metric countries.

"S1/0-HEX-M" 1/0 AWG metric Single wire lug, 1/0-14 AWG wire range, Multiple (dual) wire class B/C, and FLEX wire, 1-8 AWG, wire class G-K including mm2 class 5,single barrel, aluminum or copper wire, CU9AL, 90C temperature rating, one mounting hole, METRIC 5mm Hex Socket screw, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. 1/4" or 6mm bolt mounting hole. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. Current and temperature rating subject to the lowest temperature rated conducting part in the assembly. IHI Connectors® brand. Made in the USA from domestic and imported parts.

UL & Canada Approved for Multiple Wires 2X #14 to 2X #4 and (1X) FLEX wire Class G-K sizes #1-#8 AWG
Use of Ferrules (UL Listed) on wires 1-8 AWG

	DIY Mounting Holes™: Cat. No. S1/0 Style No. 1,5
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S1/0-HEX-M Print   For lugs without a mounting hole email sales@lugsdirect.com. Large MOQ and long lead time for lugs without mounting hole.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make complete contact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

Approved for two wire use

Dual Interlocking Lugs/ 2-4 Wire Application

Hardware not included.

Lugs sold individually.

For more interlocking lugs

click here.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.6mm)

C: 0.63" (15.9mm)

See Mechanical Drawing for detailed dimensions

"S1/0-34-41" 1/0 AWG Single wire lug, 1/0-14 AWG wire range, Multiple (dual) wire class B/C and FLEX, 1-8 AWG, wire class G-K including mm2 class 5, single barrel, aluminum or copper wire, CU9AL, 90C temperature rating, one mounting hole, slotted screw, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. 5/16" bolt mounting hole. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. Current and temperature rating subject to the lowest temperature rated conducting part in the assembly. IHI Connectors® brand. Made in the USA from domestic and imported parts.

UL & Canada Approved for Multiple Wires 2X #14 to 2X #4 and (1X) FLEX wire Class G-K sizes #1-#8 AWG
Use of Ferrules (UL Listed) on wires 1-8 AWG

	DIY Mounting Holes™: Cat. No. S1/0 Style No. 1,5
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S1/0-34-41 Print   For lugs without a mounting hole email sales@lugsdirect.com. Large MOQ and long lead time for lugs without mounting hole.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make complete contact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

Approved for two wire use

Dimensions

A: 1.46" (37.3mm)

B: 0.77" (19.0mm)

C: 0.64" (16.3mm)

I: 0.38" (9.5mm)

See Mechanical Drawing for detailed dimensions

"S1/0-TP" 1/0 AWG Single wire lug, 1/0-14 AWG wire range, Multiple (dual) wire class B/C and FLEX wire, 1-8 AWG, wire class G-K including mm2 class 5, single barrel, aluminum or copper wire, CU9AL, 90C temperature rating, one mounting hole with anti-rotation rib(turn prevent) , Slotted Screw, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. Transformer Lug - Replace Low conducting bronze with High Conductivity Dual Rated Aluminum. 5/16" bolt. IHI Connectors® brand. Made in the USA from domestic and imported parts.

UL & Canada Approved for Multiple Wires 2X #14 to 2X #4 and (1X) FLEX wire Class G-K sizes #1-#8 AWG
Use of Ferrules (UL Listed) on wires 1-8 AWG

	DIY Mounting Holes™: Cat. No. S1/0 Style No. 1,5
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S1/0-TP Print   For lugs without a mounting hole email sales@lugsdirect.com. Large MOQ and long lead time for lugs without mounting hole.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Approved for two wire use

Dimensions

A: 1.46" (37.3mm)

B: 0.77" (19.0mm)

C: 0.64" (16.3mm)

I: 0.38" (9.5mm)

See Mechanical Drawing for detailed dimensions

"S1/0-TP-HEX" 1/0 AWG Single wire lug, 1/0-14 AWG wire range, Multiple (dual) wire class B/C and FLEX wire, 1-8 AWG, wire class G-K including mm2 class 5, single barrel, aluminum or copper wire, CU9AL, 90C temperature rating, one mounting hole with anti-rotation rib(turn prevent) , Hex Socket Steel Screw, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. Transformer Lug - Replace Low conducting bronze with High Conductivity Dual Rated Aluminum. 5/16" bolt. IHI Connectors® brand. Made in the USA from domestic and imported parts.

UL & Canada Approved for Multiple Wires 2X #14 to 2X #4 and (1X) FLEX wire Class G-K sizes #1-#8 AWG
Use of Ferrules (UL Listed) on wires 1-8 AWG

	DIY Mounting Holes™: Cat. No. S1/0 Style No. 1,5
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S1/0-TP-HEX Print   For lugs without a mounting hole email sales@lugsdirect.com. Large MOQ and long lead time for lugs without mounting hole.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Approved for two wire use

Dimensions

A: 1.06" (26.9mm)

B: 0.98" (24.9mm)

C: 0.96" (24.4mm)

I: 0.62" (15.8mm)

See Mechanical Drawing for detailed dimensions

"S1/0-TP2-W-HEX" 1/0 AWG Single wire lug, 1/0-14 AWG wire range, Multiple (dual) wire class B/C and FLEX wire, 1-8 AWG, wire class G-K including mm2 class 5, single barrel, aluminum or copper wire, CU9AL, 90C temperature rating, one M8 x 1.25 mounting hole (recommended mounting bolt: M8 x 1.25 X 16mm long; assumes bus is 1mm minimum thickness) Anti-rotation /turn prevent rib, Hex socket screw, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. IHI Connectors® brand.Made in the USA from domestic and imported parts.

UL & Canada Approved for Multiple Wires 2X #14 to 2X #4 and (1X) FLEX wire Class G-K sizes #1-#8 AWG
Use of Ferrules (UL Listed) on wires 1-8 AWG

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Assembly PDF

Dual/Interlocking Lugs

Three Wire Application

2S2/0 and S2/0

Hardware not included.

Lugs sold individually.

For more interlocking lugs click here.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.7mm)

C: 1.20" (30.6mm)

See Mechanical Drawing for detailed dimensions

"2S2/0" 2/0 AWG double wire lug, 2/0-14 AWG wire class B/C, and FLEX wire, 1/0-14 AWG, wire class G-K including mm2 class 5, double barrel, aluminum or copper wire, CU9AL, 90C temperature rating, single 1/4" bolt mounting hole, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. Shipped with regular slotted screw or TUFF SLOT™ closed slot which guides driver bit for rapid assembly (subject to availability). TUFF SLOT™ is a trademark of IHI Connectors® Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. Current and temperature rating subject to the lowest temperature rated conducting part in the assembly. Made in the USA from domestic and imported parts. "Drop-In" Replacement for Homac AD-150 and Panduit LAM2A2/0-14-6.

UL & Canada Approved for FLEX wire Class G-K sizes 1/0-14 AWG

	DIY Mounting Holes™: Cat. No. 2S2/0 Style No. 3
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S2/0 Print   For lugs without a mounting hole email sales@lugsdirect.com. Large MOQ and long lead time for lugs without mounting hole.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

Assembly PDF

Dual/Interlocking Lugs

Three Wire Application

2S2/0 and S2/0

Hardware not included.

Lugs sold individually.

For more interlocking lugs click here.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.7mm)

C: 1.20" (30.6mm)

See Mechanical Drawing for detailed dimensions

"2S2/0-HEX" 2/0 AWG double wire lug, 2/0-14 AWG wire class B/C, and FLEX wire, 1/0-14 AWG, wire class G-K including mm2 class 5, double barrel, aluminum or copper wire, CU9AL, 90C temperature rating, single 1/4" bolt mounting hole, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. 3/16" Hex Socket Screw. Made in the USA from domestic and imported parts. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. Current and temperature rating subject to the lowest temperature rated conducting part in the assembly.

UL & Canada Approved for FLEX wire Class G-K sizes 1/0-14 AWG

	DIY Mounting Holes™: Cat. No. 2S2/0 Style No. 3
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S2/0-HEX Print   For lugs without a mounting hole email sales@lugsdirect.com. Large MOQ and long lead time for lugs without mounting hole.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

Assembly PDF

Dual/Interlocking Lugs

Three Wire Application

2S2/0 and S2/0

Hardware not included.

Lugs sold individually.

For more interlocking lugs click here.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.7mm)

C: 1.20" (30.6mm)

See Mechanical Drawing for detailed dimensions

Note!!!   This part has a 5mm hex socket for use in metric countries.

"2S2/0-HEX-M" 2/0 AWG metric double wire lug, 2/0-14 AWG wire class B/C, and FLEX wire, 1/0-14 AWG, wire class G-K including mm2 class 5, double barrel, aluminum or copper wire, CU9AL, 90C temperature rating, single 1/4" bolt (6mm) mounting hole, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. 5mm Metric Hex Socket Screw. Made in the USA from domestic and imported parts. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. Current and temperature rating subject to the lowest temperature rated conducting part in the assembly.

UL & Canada Approved for FLEX wire Class G-K sizes 1/0-14 AWG

	DIY Mounting Holes™: Cat. No. 2S2/0 Style No. 3
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S2/0-HEX-M Print   For lugs without a mounting hole email sales@lugsdirect.com. Large MOQ and long lead time for lugs without mounting hole.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

Assembly PDF

Dual Interlocking Lugs/

Four Wire Application

Hardware not included.

Lugs sold individually.

For more interlocking lugs click here.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.7mm)

C: 1.20" (30.6mm)

L: 0.64" (16.3mm)

See Mechanical Drawing for detailed dimensions

"2S2/0-31-42"2/0 AWG double wire lug, 2/0-14 AWG wire class B/C, and FLEX wire, 1/0-14 AWG, wire class G-K including mm2 class 5, double barrel, aluminum or copper wire, CU9AL, 90C temperature rating, TURN PREVENT USING TWO 1/4" bolts (hole is .315 +/-.007) mounting holes, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. Shipped with regular slotted screw or TUFF SLOT™ closed slot which guides driver bit for rapid assembly (subject to availability). TUFF SLOT™ is a trademark of IHI Connectors®. Made in the USA from domestic and imported parts. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. Current and temperature rating subject to the lowest temperature rated conducting part in the assembly.

	DIY Mounting Holes™: Cat. No. 2S2/0 Style No. 3
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S2/0-31-42 Print   For lugs without a mounting hole email sales@lugsdirect.com. Large MOQ and long lead time for lugs without mounting hole.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

UL & Canada Approved for FLEX wire Class G-K sizes 1/0-14 AWG

Assembly PDF

Dual Interlocking Lugs/

Four Wire Application

Hardware not included.

Lugs sold individually.

For more interlocking lugs click here.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.7mm)

C: 1.20" (30.6mm)

L: 0.64" (16.3mm)

See Mechanical Drawing for detailed dimensions

"2S2/0-31-42-HEX" 2/0 AWG double wire lug, 2/0-14 AWG wire class B/C, and FLEX wire, 1/0-14 AWG, wire class G-K including mm2 class 5, double barrel, aluminum or copper wire, CU9AL, 90C temperature rating, TURN PREVENT USING TWO 1/4" bolts (hole is .315 +/-.007) mounting holes, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. Made in the USA from domestic and imported parts. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. Current and temperature rating subject to the lowest temperature rated conducting part in the assembly.

	DIY Mounting Holes™: Cat. No. 2S2/0 Style No. 3
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S2/0-31-42-HEX Print   For lugs without a mounting hole email sales@lugsdirect.com. Large MOQ and long lead time for lugs without mounting hole.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

UL & Canada Approved for FLEX wire Class G-K sizes 1/0-14 AWG

Assembly PDF

Dual Interlocking Lugs/

Four Wire Application

Hardware not included.

Lugs sold individually.

For more interlocking lugs click here.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.7mm)

C: 1.20" (30.6mm)

L: 0.64" (16.3mm)

See Mechanical Drawing for detailed dimensions

Note!!!   This part has a 5mm hex socket for use in metric countries.

"2S2/0-31-42-HEX-M" 2/0 AWG metric double wire lug, 2/0-14 AWG wire class B/C, and FLEX wire, 1/0-14 AWG, wire class G-K including mm2 class 5, double barrel, aluminum or copper wire, CU9AL, 90C temperature rating, TURN PREVENT USING TWO 1/4" bolts (hole is .315 +/-.007) mounting holes, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. Made in the USA from domestic and imported parts. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. Current and temperature rating subject to the lowest temperature rated conducting part in the assembly.

	DIY Mounting Holes™: Cat. No. 2S2/0 Style No. 3
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S2/0-31-42-HEX-M Print   For lugs without a mounting hole email sales@lugsdirect.com. Large MOQ and long lead time for lugs without mounting hole.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

UL & Canada Approved for FLEX wire Class G-K sizes 1/0-14 AWG

Assembly PDF

Dual Interlocking Lugs/ 3-4 Wire Application

S1/0-34-41

and 2S2/0-33-44

Hardware not included.

Lugs sold individually.

For more interlocking lugs

click here.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.7mm)

C: 1.20" (30.6mm)

See Mechanical Drawing for detailed dimensions

"2S2/0-33-44" 2/0 AWG Double wire lug, 2/0-14 AWG wire class B/C, and FLEX wire, 1/0-14 AWG, wire class G-K including mm2 class 5, double barrel, aluminum or copper wire, slotted screw, CU9AL, 90C temperature rating, single 5/16" bolt mounting hole, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. Shipped with regular slotted screw or TUFF SLOT™ closed slot which guides driver bit for rapid assembly (subject to availability). TUFF SLOT™ is a trademark of IHI Connectors®. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. Current and temperature rating subject to the lowest temperature rated conducting part in the assembly. IHI Connectors® brand. Made in the USA from domestic and imported parts.

UL & Canada Approved for FLEX wire Class G-K sizes 1/0-14 AWG

	DIY Mounting Holes™: Cat. No. 2S2/0 Style No. 3
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S2/0-33-44 Print   For lugs without a mounting hole email sales@lugsdirect.com. Large MOQ and long lead time for lugs without mounting hole.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

Assembly PDF

Dual Interlocking Lugs/ 3-4 Wire Application

S1/0-34-41

and 2S2/0-33-44

Hardware not included.

Lugs sold individually.

For more interlocking lugs

click here.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.7mm)

C: 1.20" (30.6mm)

See Mechanical Drawing for detailed dimensions

"2S2/0-33-44-HEX" 2/0 AWG Double wire lug, 2/0-14 AWG wire class B/C, and FLEX wire, 1/0-14 AWG, wire class G-K including mm2 class 5, double barrel, aluminum or copper wire, CU9AL, 90C temperature rating, single 5/16" bolt mounting hole, 3/16" hex socket screws, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. Current and temperature rating subject to the lowest temperature rated conducting part in the assembly. IHI Connectors® brand. Made in the USA from domestic and imported parts.

UL & Canada Approved for FLEX wire Class G-K sizes 1/0-14 AWG

	DIY Mounting Holes™: Cat. No. 2S2/0 Style No. 3
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S2/0-33-44-HEX Print   For lugs without a mounting hole email sales@lugsdirect.com. Large MOQ and long lead time for lugs without mounting hole.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

Assembly PDF

Dual Interlocking Lugs/ 3-4 Wire Application

S1/0-34-41

and 2S2/0-33-44

Hardware not included.

Lugs sold individually.

For more interlocking lugs

click here.

Dimensions

A: 1.47" (37.3mm)

B: 0.81" (20.7mm)

C: 1.20" (30.6mm)

See Mechanical Drawing for detailed dimensions

"2S2/0-33-44-HEX-M" 2/0 AWG metric double wire lug, 2/0-14 AWG wire class B/C, and FLEX wire, 1/0-14 AWG, wire class G-K including mm2 class 5, double barrel, aluminum or copper wire, CU9AL, 90C temperature rating, single 5/16" bolt mounting hole, 5mm hex socket screws, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. Current and temperature rating subject to the lowest temperature rated conducting part in the assembly.IHI Connectors® brand. Made in the USA from domestic and imported parts.

UL & Canada Approved for FLEX wire Class G-K sizes 1/0-14 AWG

	DIY Mounting Holes™: Cat. No. 2S2/0 Style No. 3
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S2/0-33-44-HEX-M Print   For lugs without a mounting hole email sales@lugsdirect.com. Large MOQ and long lead time for lugs without mounting hole.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information

Dimensions

A: 2.00" (50.8mm)

B: 1.42" (36.1mm)

C: 0.77" (19.6mm)

I: 0.49" (12.4mm)

See Mechanical Drawing for detailed dimensions

"2S2/0-TP-STK-34-49-HEX" 2/0 AWG Double wire lug, 2/0-14 AWG wire class B/C, and FLEX wire, 1/0-14 AWG, wire class G-K including mm2 class 5, stacker type, two tier, double barrel, aluminum or copper wire, CU9AL, 90C temperature rating, single 5/16" bolt mounting hole, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified.International Hydraulics Inc® brand. 3/16" Hex Socket Screw. Made in the USA from domestic and imported parts.
UL & Canada Approved for FLEX wire Class G-K sizes 1/0-14 AWG

	DIY Mounting Holes™: Cat. No. 2S2/0 Style No.5
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S2/0-TP-STK-34-49-HEX Print   For lugs without a mounting hole email sales@lugsdirect.com. Large MOQ and long lead time for lugs without mounting hole.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Dimensions

A: 2.00" (50.8mm)

B: 1.42" (36.1mm)

C: 0.77" (19.6mm)

See Mechanical Drawing for detailed dimensions

Dimensions

A: 2.00" (50.8mm)

B: 1.42" (36.1mm)

C: 0.77" (19.6mm)

See Mechanical Drawing for detailed dimensions

Dimensions

A: 2.10" (53.3mm)

B: 1.42" (36.1mm)

C: 0.63" (16.0mm)

I: 0.40" (10.1mm)

See Mechanical Drawing for detailed dimensions

"2S2/0-TP-STK2-36-40-HEX" 2/0 AWG Double wire lug, 2/0-14 AWG wire class B/C, and FLEX wire, 1/0-14 AWG, wire class G-K including mm2 class 5, stacker type, two tier lug, double barrel, aluminum or copper wire, CU9AL, 90C temperature rating, single 5/16" bolt mounting hole, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. International Hydraulics Inc® brand. 5/16" Hex Socket Screw. Made in the USA from domestic and imported parts.
UL & Canada Approved for FLEX wire Class G-K sizes 1/0-14 AWG

	DIY Mounting Holes™: Cat. No. 2S2/0 Style No.5
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S2/0-TP-STK2-36-40-HEX Print   For lugs without a mounting hole email sales@lugsdirect.com. Large MOQ and long lead time for lugs without mounting hole.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Dimensions

A: 2.10" (53.3mm)

B: 1.42" (36.1mm)

C: 0.98" (24.1mm)

I: 0.50" (12.7mm)

See Mechanical Drawing for detailed dimensions

"2S2/0-TP-STK2-W-44-50-HEX" 2/0 AWG Double wire lug, 2/0-14 AWG wire class B/C, and FLEX wire, 1/0-14 AWG, wire class G-K including mm2 class 5, stacker type, two tier, double barrel, aluminum or copper wire, CU9AL, 90C temperature rating, single 5/16" bolt mounting hole, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified.International Hydraulics Inc® brand. 3/16" Hex Socket Screw. Made in the USA from domestic and imported parts.
UL & Canada Approved for FLEX wire Class G-K sizes 1/0-14 AWG

Limited Supply. No guarantee on future stock or replacement parts.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Dimensions

A: 2.00" (50.8mm)

B: 1.47" (37.3mm)

C: 0.63" (16.0mm)

I: 0.41" (10.4mm)

See Mechanical Drawing for detailed dimensions

"2/0TP-2" 2/0 AWG double wire lug, 2/0-14 AWG wire range, double barrel, Stacker type, two tier, Turn Prevent Rib, aluminum or copper wire, CU9AL, 90C temperature rating, one mounting hole for 1/4" bolt, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application. Canada Certified. Brumall brand. Made in the USA from domestic and imported parts.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Dimensions

A: 1.25" (31.8mm)

B: 2.25" (57.2mm)

C: 0.63" (15.9mm)

I: 0.53" (13.3mm)

See Mechanical Drawing for detailed dimensions

"2S2/0-TP-STK3-M8-53-HEX" 2/0 AWG Double wire lug, 2/0-14 AWG wire class B/C, and FLEX wire, 1-8 AWG, wire class G-K including mm2 class 5, stacker type, two tier, doublebarrel, aluminum or copper wire, CU9AL, 90C temperature rating, single M8 bolt mounting hole, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. International Hydraulics Inc® brand. 3/16" Hex Socket Screws. Made in the USA from domestic and imported parts.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

Dimensions

A: 1.25" (31.8mm)

B: 2.25" (57.2mm)

C: 0.98" (24.9mm)

I: 0.53" (13.3mm)

See Mechanical Drawing for detailed dimensions

"2S2/0-TP-STK3-M10-53-HEX" 2/0 AWG Double wire lug, 2/0-14 AWG wire class B/C, and FLEX wire, 1-8 AWG, wire class G-K including mm2 class 5, stacker type, two tier, doublebarrel, aluminum or copper wire, CU9AL, 90C temperature rating, single M10 bolt mounting hole, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. International Hydraulics Inc® brand. 3/16" Hex Socket Screws. Made in the USA from domestic and imported parts.
UL & Canada Approved for FLEX wire Class G-K sizes 1/0-14 AWG

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

4 wires

3 wires

Assembly PDF

Dual/Interlocking Lugs

4-6 Wire Application

2LS500-TP-41-59

and 2S250

Hardware not included.

Lugs sold individually.

For more interlocking lugs

click here.

Dimensions

A: 2.56" (65.1mm)

B: 1.19" (30.2mm)

C: 1.63" (41.3mm)

See Mechanical Drawing for detailed dimensions

"2S250" 250 kcmil (4/0 AWG) double wire lug, 250kcmil (4/0 AWG) - 6 AWG wire range, Multiple (dual) wire class B/C and FLEX wire, AWG 3/0-6, class wire class G-K including mm2 class 5, double barrel, aluminum or copper wire, CU9AL, 90C temperature rating, single 3/8" bolt mounting hole, NEMA mounting holes and spacing; this is not a NEMA tested part, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. International Hydraulics Inc. Made in the USA from domestic and imported parts. "Drop-In" Replacement for Homac AD-250 and Panduit LAM2A250-38-6.

UL & Canada Approved for Multiple wires class B, C, 2X AWG 2-6 &2X 25-16 mm2 & (1X) FLEX wire Classd G-K sizes #6-#3/0 AWG

	DIY Drill Mounting Holes: Cat. No. 2S250 Style No.1
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the 2S250 Print   For lugs without a mounting hole email sales@lugsdirect.com. Large MOQ and long lead time for lugs without mounting hole.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make complete contact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information