Brumall Manufacturing

Corp.

Greaves

Electrical Connectors

"S1/0-34-41" 1/0 AWG Single wire lug, 1/0-14 AWG wire range, Multipe (dual) wire class B/C and FLEX, 1-8 AWG, wire class G-K including mm2 class 5, single barrel, aluminum or copper wire, CU9AL, 90C temperature rating, one mounting hole, slotted screw, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. 5/16" bolt mounting hole. International Hydraulics Inc® brand. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. Current and temperature rating subject to the lowest temperature rated conducting part in the assembly.

UL & Canada Approved for Multiple Wires 2X #14 to 2X #6 and (1X) FLEX wire Class G-K sizes #1-#8 AWG
Use of Ferrules (UL Listed) on wires 1-8 AWG

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information