Operated By:
Advancement International Ltd.
595 Circlewood, Aurora, OH 44202(USA)
Email: sales@LugsDirect.com
Phone: 330-562-8983 | FAX: 330-562-9990

IHIConnectors

Brumall Manufacturing

Corp.

Greaves

Electrical Connectors

Hillsdale Terminal

Accepted forms of payment:

Made in the USA
from Domestic and Imported Parts

THT MODE

See all SMT PCB Wire Lugs

SMT - Double Ring Lug Mount Block up to 65 Amps

Part No.

Description & Information

Purchase Options

B4A-PCB-2RLM-KIT

Two Ring Lug Mount

Ring Lug

Wire Range

Max. Current (Copper Wire)

Wire / Screw Access

Screw / Drive Head

Mounting Style

1 to 289pcs
$1.21/ea
(or)
290pcs +
$0.90/ea
(or)

1500pcs
"1 full box"
$0.67/ea
(or)
3000pcs
"2 full boxes"
$0.61/ea

AWG 4-14
(16-2.5mm²)

85A

(75°C)

Ring Lug Mount

1/4-28 hex socket screw & Washer

SMT Solderable Surface Mount

B4A-PCB-2RLM no screw, 4AWG - 14AWG High AMP PCB wire lug

B4A-PCB-2RLM two ring lugs

Ring lugs not included

Part not assembled

B4A-PCB-2RLM, ring lug mount with wrenches

When tightening bolt, two wrenches should be used to avoid damaging solder bond

dimensions diagram

Dimensions

A: 0.38" (9.7mm)

B: 0.62" (15.7mm)

C: 0.38" (9.7mm)

D: 0.49" (12.4mm)

See Mechanical Drawing for detailed dimensions

B4A-PCB-RLM-KIT: Double Ring lug mount block with integrated aluminum foot, tin plated, solderable. Suggested ring lug wire sizes 4-14 AWG, 85 AMP. Kitted with a zinc plated steel 1/4-28 hex socket screw and split ring washer. Ring lugs not included. Able to fit 2 ring lugs. Part side hole not intended for wire insertion when the part is used as a ring lug mount. SMT/SMD solderable tin plated. Interntaional Hydraulics Inc. brand.

Temperature Range and Rating Guide

One piece SMT / SMD Solderable Body Types

Reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). View Soldering Temperature Profiles here. Wire choice affected by customer supplied ring lug and ring lug codes and ratings. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards.

Soldering Recommendations, Precautions when using SMT, and SMT FAQ

B12-NM-SMT orientations

Figure 2: Less Sturdy: Horizontal screw and horizontal wire. Best for factory wiring only.

Figure 3: Least Sturdy: Horizontal screw and vertical wire. Best for factory wiring only.

In Figure 2 and 3 orientation, when using a headed screw or ring lug and bolt it's recommended that the head of the screw hangs off the edge of the board. Screws with little or no clearance between the head of the screw and the board can result in mechanical and electrical fouling.

Looking for a sturdier mounting method? See the THT through hole technology function of this part: THT B4A-PCB-2RLM

For More Information Click the Icons Below
				NO UL, UR	RoHS 10/10

This part currently has no UL / Canada certification on the lug itself but is approvable under requirements of UL486A-B or UL486E as part of a end use assembly test involving heat rise and wire pull out tests. CLICK HERE FOR MORE INFO.