;

LugsDirect.com
Operated By:
Advancement International Ltd.
595 Circlewood, Aurora, OH 44202(USA)
Email: sales@LugsDirect.com
Phone: 330-562-8983 | FAX: 330-562-9990
IHI Connectors Inc.

IHI Connectors

Brumall Manufacturing Corp.

Brumall Manufacturing

Corp.

Greaves Corp.

Greaves

Electrical Connectors

Hillsdale TerminalsHillsdale Terminal

Accepted forms of payment:

 

STANDARD STOCK NEUTRAL BARS WITH MOUNTING HOLES

Ø0.25 0 REF
0.312 MTG. HOLE


Click on the part number to see all information about this part:

Part Number
Wire Range
Usable
Dimensions: L x W x H (inches)
Mtg. Hole Quantity
Mtng. Hole Spacing
AWG
C ircuits
L +/-.02
W
H
(N = ), and Locations
+/-0.015
4-14
2
1
0.312
0.437
N = 1 at loc 2
N/A
4-14
3
1.625
0.312
0.437
N = 2 at loc 1 and 5
1.25
4-14
3
1.625
0.312
0.437
N = 2 at loc 1 and 5
1.25
4-14
4
1.625
0.312
0.437
N = 1 at loc 3
N/A
4-14
5
2.25
0.312
0.437
N = 2 at loc 1 and 7
1.875
4-14
5
2.25
0.312
0.437
N = 2 at loc 1 and 7
1.875
4-14
5
2.25
0.312
0.437
N = 2 at loc 1 and 7
1.875
4-14
5
2.86
0.312
0.437
N = 4 at loc 1,2,8, and 9
0.313, 1.875, 0.313
4-14
6
2.25
0.312
0.437
N = 1 at loc 4
N/A
4-14
6
2.25
0.312
0.437
N = 1 at loc 4
N/A
4-14
6
2.5625
0.312
0.437
N = 2 at loc 1 and 8
2.1875
4-14
6
2.5625
0.312
0.437
N = 2 at loc 1 and 8
2.1875
4-14
7
2.88
0.312
0.437
N = 2 at loc 1 and 9
2.5
4-14
7
2.88
0.312
0.437
N = 2 at loc 3 and 7
0.813, 1.25, 0.813
4-14
8
3.1875
0.312
0.437
N = 2 at loc 1 and 10
2.8725
4-14
8
3.1875
0.312
0.437
N = 2 at loc 1 and 10
2.8725
4-14
10
3.8125
0.312
0.437
N = 2 at loc 1 and 12
3.4375
4-14
12
4.4375
0.312
0.437
N = 2 at loc 1 and 14
4.0625
4-14
20
6.9375
0.312
0.437
N = 2 at loc 1 and 22
6.5625

 

UL & CSA AGENCY APPLICATION NOTES:

- UL Recognized ("UR" mark) Class ZMVV2 and "CSA" Certified (CSA mark)

- Installation must be carried out only by qualified electricians in accordance with all applicable NEC & UL/CSA standards for the approved application.

- Approved for 90 ° C Temperature Rating Wire, CU9AL

- Amp Rated at 85 Amps for Copper wire and 70 Amps for Aluminum wire

- Wire range, American Wire Gauge AWG 4-14 CU (copper wire), 4-12 Al (aluminum wire) Dual Rated, Solid & Stranded, industrial rigid stranding wire.

- Tightening torques, 4-6 AWG = 45 lb-in, 8 AWG = 40 lb-in, 10-14 AWG = 35 lb-in

- The bar shall be prevented from turning by close fitting walls, or other turn preventive features such as two mounting holes.

- The bar shall not be mounted to a bus bar to act as a power distribution means to or from that bar.

- The bar is designed to be used as a neutral bar for ground or power.

- The bar is for use only in complete equipment where the suitability of the combination is determined & approved by UL

- The mounting screw is to be size #10-32 UNF. The proper use of washers to distribute screw clamping forces on the aluminum should be employed. Bellevilles and lock nuts should be considered in case of vibration.

- The screw will hold the smaller wires when the appropriate torque for the small wire is fully applied

-Dry locations only.

 

CONSTRUCTION NOTES:

- The tolerance between mounting holes is +/-.015"

- The mounting hole is .201 +.006/-.003.

- The listed overall length of each bar is +/-.020

- Material is High Strength Tempered aluminum 6160 with conductivity approx. 43% IACS.

- Aluminum body is Tin Plated to resist oxidation and galvanic corrosion.

- Screws are Zinc Plated Steel with Trivalent (Cr+3) Chromate conversion top layer.

Copyright © 2018 Advancement International Ltd, Aurora Ohio - All Rights Reserved
Advancement International Ltd is a registered company of Ohio, USA
IHI is the Registered Trademark of International Hydraulics Inc.
LugsDirect.com is owned and operated by Advancement International Ltd.
DUNS # 148692197, REGISTERED WITH CCR, CAGE / NCAGE NUMBER 5A6R9,
A2 WOMAN OWNED SMALL BUSINESS, NAICS 335931, SIC 3643,
Made in the USA from domestic and imported parts. NAFTA CERTIFICATES AVAILABLE