Advancement International Ltd.
595 Circlewood, Aurora, OH 44202(USA)
Phone: 330-562-8983 | FAX: 330-562-9990
Accepted forms of payment:
|See all Shunts & Jumpers|
|High Current PCB Shunts and Jumpers. For high current PCB applications it is necessary to move current to a location where the foil weight or trace width may not be adequate. IHI High Current Shunts and Jumpers are stock items. Hot spots can be alleviated by using an IHI shunt as a current path: a heat sink and a interlayer bus carry current through the PCB. Also useful for current sensing loop primary.|
|THT PCB Application Only|
|Part No.||Description & Information||Purchase Options|
|AMPS||Penetration & Cross Section||Dimensions LxWxH||
"full box"$ 0.23/ea
A: 0.57" (14.4mm)
B: 0.24" (6.1mm)
C: 0.58" (14.8mm)
D: 0.05" (1.3mm)
E: 0.22" (5.5mm)
See Mechanical Drawing for detailed dimensions
|PCB Shunts and jumpers; Solid copper with high solderability, tin plating for wave and reflow, soldering pitch of legs is controlled for consistent insertion into THT PCB holes/slots. Arches type for jumping over component or current looping. International Hydraulics Inc.|
|14257||No angle, 0.23" penetration|
|14257-45||45o angle, 0.13" penetration|
|14257-45-150||45o angle, 0.15" penetration|
|14257-SMT||Surface mount staple|
THT Wave solderable or SMT solderable these all copper devices are able to pass high current levels from layer to layer as well as to bridge a gap in the current path.
Compatible with THT / SMT /SMD PCB applications
IHI High Current Shunts and Jumpers are 100% copper with tin over nickel barrier for high soldering temperatures found in lead free soldering.
All PCB Current Shunts and Jumpers are RoHS and REACH compliant as well as lead free.
Current ratings are conservatively rated for low heat rise (I2R watts) with high currents.
May be stitched together in the same via slot for chain type use to increase length or multiple current nodes.
Low profile types and arched types for when a current sensing winding is needed.
Expansion and contraction same rate as copper foils to avoid warping PCB.
Available by the handful or thousands at a time from stock!
High Current shunting along the PCB
High current shunting through the PCB – layer to layer
Solderable localized heat sink for hot spot problems
Lower I2R watts where foil is generating too much heat
Provide a current loop for current transformer coil.
Provide a current reach bar for high current semiconductors connections in a crowded PCB layout situation
For higher volume quantities please contact our sales department for pricing and availability:
- Phone: 330-562-8983
- Email: Sales@LugsDirect.com
- Fax: 330-562-9990
Copyright © 2018 Advancement International Ltd, Aurora Ohio - All Rights Reserved
Advancement International Ltd is a registered company of Ohio, USA
IHI is the Registered Trademark of International Hydraulics Inc.
LugsDirect.com is owned and operated by Advancement International Ltd.
DUNS # 148692197, REGISTERED WITH CCR, CAGE / NCAGE NUMBER 5A6R9,
A2 WOMAN OWNED SMALL BUSINESS, NAICS 335931, SIC 3643,
Made in the USA from domestic and imported parts. NAFTA CERTIFICATES AVAILABLE