Advancement International Ltd.
595 Circlewood, Aurora, OH 44202(USA)
Phone: 330-562-8983 | FAX: 330-562-9990
Accepted forms of payment:
750 kcmil Single Wire Single Barrel Mechanical Lug 750kcmil-1/0 AWG
|Part No.||Description & Information||Purchase Options|
750 kcmil Lug
|Wire Range||Screw Type||Bolt Size||Rating||
1 to 34pcs
|750 kcmil -1/0 AWG||1/2"|
Dual Interlocking Lugs/ Two Wire Application
Dual Interlocking Lugs/ 90 Degree Wire Splicer - Right angle lug set
Hardware not included. Lugs sold individually.
For more interlocking lugs
A: 2.84" (72.1mm)
B: 1.81" (46.0mm)
C: 1.36" (34.5mm)
See Mechanical Drawing for detailed dimensions
"S750-53-63" 750 kcmil Single wire lug, 750 kcmil-1/0 AWG wire range, single barrel, aluminum or copper wire, CU9AL, 90C temperature rating, one 1/2" bolt mounting hole, UL Listed at 600v - acceptable for use through 2000v, Canada Certified. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. Current and temperature rating subject to the lowest temperature rated conducting part in the assembly. International Hydraulics Inc® brand.
WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)
Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.
"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."
Ref. UL White Book ZMVV section
|"FLEX" E129884 UL486A,B, ZMVV, 1243943 Canada 22.2 No.65|
475 Amp 75C Cu Wire
535 Amp 90C Cu Wire
385 Amp 75C Al Wire
435 Amp 90C Al Wire
|S500-41-63||500kmcil-4AWG, Standard Hex Socket|
|S500-41-63-M||500kmcil-4AWG, 10mm Hex Socket|
|S600-41-63||Standard Hex Socket|
|S600-41-63-M||10mm Hex Socket Screw|
|S600-53-63-M|| 1/2" bolt mounting hole,
and 10mm HEX Socket Screw
|S600-53-63-SE||1/2" bolt mounting hole,
with a side entry wire hole
Copyright © 2023 Advancement International Ltd, Aurora Ohio - All Rights Reserved
Advancement International Ltd is a registered company of Ohio, USA
IHI® is the Registered Trademark of International Hydraulics Inc.
LugsDirect.com is owned and operated by Advancement International Ltd.
DUNS # 148692197, REGISTERED WITH CCR, CAGE / NCAGE NUMBER 5A6R9,
A2 WOMAN OWNED SMALL BUSINESS, NAICS 423610, SIC 3643,
Made in the USA from domestic and imported parts. NAFTA CERTIFICATES AVAILABLE