Operated By:
Advancement International Ltd.
595 Circlewood, Aurora, OH 44202(USA)
Email: sales@LugsDirect.com
Phone: 330-562-8983 | FAX: 330-562-9990

IHIConnectors

Brumall Manufacturing

Corp.

Greaves

Electrical Connectors

Hillsdale Terminal

Accepted forms of payment:

Made in the USA
from Domestic and Imported Parts

THT MODE

See all SMT PCB Wire Lugs

SMT - Ring Lug Mount Block up to 65 Amps

Part No.

Description & Information

Purchase Options

B6A-PCB-RLM-12W-KIT

Ring Lug Mount

Ring Lug Wire Size

Max. Current (Copper Wire)

Wire / Screw Access

Screw / Drive Head

Mounting Style

1 to 234pcs
$1.21/ea
(or)
235pcs +
$0.90/ea
(or)

1500pcs
"1 full box"
$0.67/ea
(or)
3000pcs

"2 full boxes"
$0.61/ea

AWG 6-16
(10-1.5mm²)

65A

(75°C)

Ring Lug Mount

Hex Cap screw 1/4"-28 UNF & M6 Washer

SMT Solderable Surface Mount

B6A-PCB-RLM-12W, ring lug mount components

B6A-PCB-RLM-12W, ring lug mount smt

Ring Lugs not included.

B6A-PCB-RLM-12W, ring lug mount with wrenches

When tightening bolt, two wrenches should be used to avoid damaging solder bond

dimensions diagram

Dimensions

A: 0.34" (8.6mm)

B: 0.52" (13.2mm)

C: 0.34" (8.6mm)

D: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

B6A-PCB-RLM-12W-KIT: Ring lug mount block with integrated aluminum foot, tin plated, solderable. Suggested ring lug wire sizes 6-16 AWG, up to 65 AMP. Kitted with a zinc plated steel 1/4-28 hex cap bolt and M6 washer. Ring lug not included. Part side hole not intended for wire insertion when the part is used as a ring lug mount. SMT/SMD solderable tin plated. When tightening bolt, two wrenches should be used to avoid damaging smt bond. International Hydraulics Inc® brand.

Temperature Range and Rating Guide

One piece SMT / SMD Solderable Body Types

Reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). View Soldering Temperature Profiles here. Wire choice affected by customer supplied ring lug and ring lug codes and ratings. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards.

Soldering Recommendations, Precautions when using SMT, and SMT FAQ

B6A-SMT ORIENTATIONS

Figure 2: Less Sturdy: Horizontal screw horizontal ring lug mount. Best for factory wiring only.

Figure 3: Least Sturdy: Horizontal screw and horizontal ring lug mount. Best for factory wiring only.

In Figure 2 and 3 orientation, when using a headed screw or ring lug and bolt it's recommended that the head of the screw hangs off the edge of the board. Screws with little or no clearance between the head of the screw and the board can result in mechanical and electrical fouling.

Looking for a sturdier mounting method? See the THT through hole technology function of this part: THT B6A-PCB-RLM-12W

For More Information Click the Icons Below
				NO UL, UR	RoHS 10/10

This part currently has no UL / Canada certification on the lug itself but is approvable under requirements of UL486A-B or UL486E as part of a end use assembly test involving heat rise and wire pull out tests. CLICK HERE FOR MORE INFO.