IHIConnectors

Accepted forms of payment:

Ring lugs not included

Part not assembled

When tightening bolt, two wrenches should be used to avoid damaging solder bond

Dimensions

A: 0.34" (8.6mm)

B: 0.52" (13.2mm)

C: 0.34" (8.6mm)

D: 0.42" (10.7mm)

See Mechanical Drawing for detailed dimensions

B6A-PCB-2RLM KIT: Double Ring lug mount block with integrated aluminum foot, tin plated, solderable. 1 leg at .336X.14” with a .10" (2.54mm) PCB penetration. Suggested ring lug wire sizes 6-16 AWG, up to 65 AMP. Kitted with a zinc plated steel 1/4-28 hex socket screw and split ring washer. Ring lugs not included. Able to fit 2 ring lugs. Part side hole not intended for wire insertion when the part is used as a ring lug mount. SMT/SMD solderable tin plated. Interntaional Hydraulics Inc. brand.

Temperature Range and Rating Guide

One piece Body THT Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Wire choice affected by customer supplied ring lug and ring lug codes and ratings. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards.

Soldering Recommendations