Advancement International Ltd.
595 Circlewood, Aurora, OH 44202(USA)
Phone: 330-562-8983 | FAX: 330-562-9990
Accepted forms of payment:
|See all SMT PCB Wire Lugs|
SMT - Double Ring Lug Mount Block up to 65 Amps
|Part No.||Description & Information||Purchase Options|
Two Ring Lug Mount
|Ring Lug Wire Range||Max. Current (Copper Wire)||Wire / Screw Access||Screw / Drive Head||Mounting Style||
1 to 289pcs
|Ring Lug Mount||Hex Socket Screw 1/4"-28 UNF & Washer||
SMT Solderable Surface Mount
Ring lugs not included
Part not assembled
When tightening bolt, two wrenches should be used to avoid damaging solder bond
A: 0.34" (8.6mm)
B: 0.52" (13.2mm)
C: 0.34" (8.6mm)
D: 0.42" (10.7mm)
See Mechanical Drawing for detailed dimensions
B6A-PCB-2RLM KIT: Double Ring lug mount block with integrated aluminum foot, tin plated, solderable. Suggested ring lug wire sizes 6-16 AWG, up to 65 AMP. Kitted with a zinc plated steel 1/4-28 hex socket screw and split ring washer. Ring lugs not included. Able to fit 2 ring lugs. Part side hole not intended for wire insertion when the part is used as a ring lug mount. SMT/SMD solderable tin plated. Interntaional Hydraulics Inc. brand.
Due to peel off torque limitations, wire size and torque may be limited to 8 AWG maximum.
Temperature Range and Rating Guide
One piece SMT / SMD Solderable Body Types
Reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). View Soldering Temperature Profiles here. Wire choice affected by customer supplied ring lug and ring lug codes and ratings. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Meets IEC volt drop test standards.
Soldering Recommendations, Precautions when using SMT, and SMT FAQ
"Marine Version" 2RLM with B6A-NH-PCB-RS-NS and customer supplied standard commercial stainless hardware
Figure 2: Less Sturdy: Horizontal bolt and horizontal ring lug mount. Best for factory wiring only.
Figure 3: Least Sturdy: Horizontal bolt and horizontal ring lug mount. Best for factory wiring only.
In Figure 2 and 3 orientation, when using a headed screw or ring lug and bolt it's recommended that the head of the screw hangs off the edge of the board. Screws with little or no clearance between the head of the screw and the board can result in mechanical and electrical fouling.
Looking for a sturdier mounting method? See the THT through hole technology function of this part: THT B6A-PCB-2RLM
|This part currently has no UL / Canada certification on the lug itself but is approvable under requirements of UL486A-B or UL486E as part of a end use assembly test involving heat rise and wire pull out tests. CLICK HERE FOR MORE INFO.|
|B6A-PCB||Slotted Set Screw|
|B6A-PCB-HEX||Hex Socket Screw|
|B6A-PCB-RLM||AWG 6-16, 1 Ring Lug Mount Capacity|
|B6A-PCB-RS||Robertson Slotted Screw|
Copyright © 2023 Advancement International Ltd, Aurora Ohio - All Rights Reserved
Advancement International Ltd is a registered company of Ohio, USA
IHI® is the Registered Trademark of International Hydraulics Inc.
LugsDirect.com is owned and operated by Advancement International Ltd.
DUNS # 148692197, REGISTERED WITH CCR, CAGE / NCAGE NUMBER 5A6R9,
A2 WOMAN OWNED SMALL BUSINESS, NAICS 423610, SIC 3643,
Made in the USA from domestic and imported parts. NAFTA CERTIFICATES AVAILABLE