IHIConnectors

Accepted forms of payment:

B6A-PCB-SS is End Of Life status with limited long term parts supply, see replacement part B6A-PCB with zinc plated steel screw.

Current stock 70,000 pcs (11/2024)

Lead time for 5k 2 weeks from PO for assembly

Lead time for large quantities 2 weeks plus 1 week per 10k pcs for assembly

B6A-PCB-SS: 6 AWG PCB wire lug, 6-16* AWG, 65 AMP, slotted set screw. 1 leg at .336X.14” with a .10" (2.54mm) PCB penetration. Side wire, and top screw entrance. International Hydraulics Inc® brand.

Temperature Range and Rating Guide

One piece Body THT Types

Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. THT (Through Hole Technology). Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Exceeds IEC volt drop test standards. Variety of wire binding screw options.

One piece SMT / SMD Solderable Body Types

 Wave and reflow solderable high current PCB wire terminal lug / connector for high amp power applications. SMT / SMD (Surface Mount Technology, Surface Mount Device). View Soldering Temperature Profiles here. Copper or aluminum wire, stranded and solid wire per UL486 wire code. Solid mass, high conductivity aluminum alloy body for tens of micro ohms range of resistance wire to foil conductivity, low resistance current path. Exceeds IEC volt drop test standards. Variety of wire binding screw options.  

Soldering Recommendations, Precautions when using SMT, and SMT FAQ

*16 AWG or fine stranded wires recommend to use wire ferrules.

Stainless steel screw, and integrated aluminum foot, tin plated, solderable.