Brumall Manufacturing

Corp.

Greaves

Electrical Connectors

"S2/0" 2/0 AWG Single wire lug, 2/0-14 AWG wire range, wire class B/C and FLEX, AWG 1/0-14, wire class G-K class 5, single barrel, aluminum or copper wire, CU9AL, 90C temperature rating, one 1/4" mounting hole, Voltage Rating: 600 V, 2000 V or to 35 KV (uninsulated) depending on application, Canada Certified. International Hydraulics Inc® brand. Shipped with regular slotted screw or TUFF SLOT™ closed slot which guides driver bit for rapid assembly (subject to availability). TUFF SLOT™ is a trademark of IHI Connectors® Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. Current and temperature rating subject to the lowest temperature rated conducting part in the assembly. "Drop-In" Replacement for Homac A-150 and Panduit LAMA2/0-14-Q.

UL & Canada Approved for FLEX wire Class G-K sizes 1/0-14 AWG

	DIY Mounting Holes™: Cat. No. S2/0 Style No. ALL
Canada and UL permitted field modification by customer per the Drill your own™ Guide for Field Drilling Mounting Holes and the S2/0 Print   For lugs without a mounting hole email sales@lugsdirect.com. Large MOQ and long lead time for lugs without mounting hole.

*ZMVV 486 UL Listed Pressure Connector in Specific Dry Location Panel Grounding Applications *NOT a UL467 KDER Grounding Lug *Click here for information for use in UL 508A, UL508 panels and other permitted Grounding Applications subject to further UL investigation.

WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)

INSTALLATION

Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.

"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, and the like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."

Ref. UL White Book ZMVV section

ZMVV UL Whitebook Installation Information