Advancement International Ltd.
595 Circlewood, Aurora, OH 44202(USA)
Phone: 330-562-8983 | FAX: 330-562-9990
International Hydraulics Inc
Accepted forms of payment:
|See all Single Wire Lugs|
350 kcmil Single Wire Single Barrel Mechanical Lug 350 kciml - 6 AWG
|Part No.||Description & Information||Purchase Options|
350 kcmil Lug
|Wire Range||Screw Type||Bolt Size||Rating||
1 to 44pcs
|350 kcmil - 6 AWG||
2 Wire Application
Hardware not included.
Lugs sold individually.
For more interlocking lugs
A: 2.00" (50.8mm)
B: 1.13" (28.6mm)
C: 1.00" (25.4mm)
See Mechanical Drawing
for detailed dimensions
"S350-41-50" 350 kcmilSingle wire lug, 6 - 350 kcmil AWG wire range, and FLEX wire class G-K including mm2 class 5, single barrel, Hex socket screw, aluminum or copper wire, CU9AL, 90C temperature rating, one mounting hole of .50 inch dia 1/2" bolt, NEMA mounting holes and spacing; this is not a NEMA tested part, one 1/2" bolt mounting holes, UL Listed at 600v - acceptable for use through 2000v, CSA Certified. Stacking, nesting, and interlocking lugs permitted under UL White book ZMVV. International Hydraulics Inc. brand.
WIRE CONNECTORS AND SOLDERING LUGS (ZMVV)
Wire connectors are intended for use in installations covered by ANSI/NFPA 70, ‘‘National Electrical Code’’ (NEC), and should be installed using the prescribed manufacturer’s installation instructions.
"Stacking of connectors (multiple connectors assembled using a single bolt, nut and washers) may be permitted where mechanical interference is reduced or eliminated with the use of offset tangs, stacking adapters, andthe like. The surface contact area of the mounting tang should make completecontact with the mounting surface or the previously stacked connector tang."
Ref. UL White Book ZMVV section
|GUIDE ON FLEX WIRE||"FLEX" E129884 UL486A,B, ZMVV, 1243943 CSA 22.2 No.65|
|310 Amp 75C Cu Wire
350 Amp 90C Cu Wire
250 Amp 75C Al Wire
280 Amp 90C Al Wire
|S250||.343" bolt mounting hole, .906" body width, with 250kcmil-6AWG.|
|S250-10.2-20M||3/8" (M10) bigger bolt mounting, .788" narrow body width, with 250kcmil-6AWG.|
|S300||.343" bolt mounting hole, .906" body width|
|S300-12.8-24.5M||300kcmil-6AWG wire range, 1/2"0 (12mm) bigger bolt mounting, .964" narrow body width|
|S300-26-44-M||300kcmil-6AWG wire range, 1/4" bolt mounting hole.|
|S300-T-26-26-M||300kcmil-6AWG wire range, "T" shaped body with 1/4" mounting bolt hole.|
Copyright © 2017 Advancement International Ltd, Aurora Ohio - All Rights Reserved
Advancement International Ltd is a registered company of Ohio, USA
IHI is the Registered Trademark of International Hydraulics Inc. .
LugsDirect.com is owned and operated by Advancement International Ltd.
DUNS # 148692197, REGISTERED WITH CCR, CAGE / NCAGE NUMBER 5A6R9,
A2 WOMAN OWNED SMALL BUSINESS, NAICS 335931, SIC 3643,
Made in the USA from domestic and imported parts. NAFTA CERTIFICATES AVAILABLE